General industrial cleaners
Non-CFC, general-purpose cleaner for plastic parts
General-purpose cleaner removes most greases, oils, lubrication fluids, metal cuttings and fines from surfaces to be bonded.
All marks used are trademarks and/or registered trademarks of Henkel and its affiliates in the US, Germany, and elsewhere.
231562
- Description
- Technical specification
For effective cleaning and degreasing of plastic components prior to bonding, choose LOCTITE® SF 7070. Suitable for use as a spray or in immersion cleaning at room temperature, this solvent-based, non-CFC cleaner can remove most oils, greases, lubrication fluids, and other contaminants from plastic parts without the risk of stress cracks.
-
General purpose parts cleaner
-
Compatible with most plastics
-
Will not cause stress cracks
-
Can be applied by spray or immersion
Application method:
Dip,Spray & Wipe
Applications:
Parts Cleaning
Cure type:
Non-Curing
Key characteristics:
Pre-bonding Cleaning,Solvent Based
Physical form:
Liquid
Recommended for use with:
Plastic
How to use
Hold the can upright approximately 1" from the area to be cleaned and spray the area to be cleaned. Wipe the area with a clean rag to remove the contamination. After use, turn the can upside down and spray for 3 seconds to clear the nozzle.
FAQ
If a substrate is dirty, the bond is only as strong as the adhesion of the contaminant to the part, not the adhesive to the part. Contaminants can come from machining, protecting, handling, manufacturing, facility surroundings, and even from cleaners used previously that have left a film. Just a slight oil film left behind on a substrate, can reduce adhesive performance by as much as 60 percent.
-
{{#data}}
{{#distributor.isVisible}}
{{#distributor.isExpanded}}
-
{{^distributor.unique}}
{{/distributor.unique}}