Part no. (SKU/IDH):
2927804
IDH Name:
LOCTITE® AA 3510, Bottle
Structural adhesives
Low viscosity structural bonder for interior permanent magnets
This 2-step, no-mix, low-viscosity structural bonder shows high impact resistance and is specially designed for interior permanent magnet (IPM) bonding.
Part no. (SKU/IDH):
2927804
IDH Name:
LOCTITE® AA 3510, Bottle
All marks used are trademarks and/or registered trademarks of Henkel and its affiliates in the US, Germany, and elsewhere.
-
{{#data}}
{{#distributor.isVisible}}
{{#distributor.isExpanded}}
-
{{^distributor.unique}}
{{/distributor.unique}}
{{#distributor.onShelf}} {{#distributor.withSpecialPrice}} {{distributor.prices.specialWithSymbol}}
{{distributor.prices.regularWithSymbol}}
{{#distributor.withoutSpecialPrice}} {{distributor.prices.regularWithSymbol}}
{{#distributor.anyInStock}} {{/distributor.anyInStock}}In stock {{#distributor.notInStock}} {{/distributor.notInStock}}Out of stock {{#distributor.notOnShelf}} {{^distributor.notInStock}} {{#distributor.onShelf}} All available stock is already in cartYou have reached the maximum order quantity availableFor industrial use only. Not intended for consumer sale or use.
Large volume or special order?
{{#distributor.notOnShelf}} {{/distributor.notInStock}}{{#distributor.notInStock}} {{#distributor.onShelf}} {{#distributor.notInStock}} {{/distributor.onShelf}}There was a problem with your request. Please try again or contact us directly.
- Description
- Technical specification
- Question & answer
LOCTITE® AA 3510 is a high-impact-resistant structural adhesive for interior permanent magnet (IPM) bonding. It cures through UV light in 30 seconds, providing large gap fills up to 2–3 mm (0.08"–0.11"), and provides a robust room-temperature curing performance in bond gaps of up to 0.254 mm (0.01"). Temperature resistance is up to 120°C (248°F). Please note this product requires LOCTITE® SF 7091 to activate (solvent-free).
-
High impact resistance: >25 J measured by ISO 11343
-
Very high shear strength: 23 N/mm²
-
UV cure in 30 seconds
-
Large gap-fill up to 0.254 mm (0.01")
-
Temperature resistant up to 120°C (248°F)
- Product category:
- Structural adhesives
Technologies:
-
Acrylates, anaerobic cure
- Applications:
- Structural bonding
- Chemical basis / base:
- Urethane methacrylate ester
- Color:
- Light amber
- Cure type:
- Anaerobic cure; UV cure
- Fixture time, Steel:
- 30.0 s
- Gap fill, @ 22.0 °C:
- 0.25 mm
- Number of components:
- 1 part
- Operating temperature:
- -40.0 °C - 150.0 °C
- Shear strength, Mild Steel (grit blasted):
- > 23.0 N/mm²
- Viscosity, cone & plate, @ 25.0 °C:
- 300.0 mPa·s (cP) - 800.0 mPa·s (cP)
-
{{#data}}
{{#distributor.isVisible}}
{{#distributor.isExpanded}}
-
{{^distributor.unique}}
{{/distributor.unique}}
{{#distributor.onShelf}} {{#distributor.withSpecialPrice}} {{distributor.prices.specialWithSymbol}}
{{distributor.prices.regularWithSymbol}}
{{#distributor.withoutSpecialPrice}} {{distributor.prices.regularWithSymbol}}
{{#distributor.anyInStock}} {{/distributor.anyInStock}}In stock {{#distributor.notInStock}} {{/distributor.notInStock}}Out of stock {{#distributor.notOnShelf}} {{^distributor.notInStock}} {{#distributor.onShelf}} All available stock is already in cartYou have reached the maximum order quantity availableFor industrial use only. Not intended for consumer sale or use.
Large volume or special order?
{{#distributor.notOnShelf}} {{/distributor.notInStock}}{{#distributor.notInStock}} {{#distributor.onShelf}} {{#distributor.notInStock}} {{/distributor.onShelf}}There was a problem with your request. Please try again or contact us directly.
Every question, request, and challenge is an opportunity for us to help your business perform. And we have all the right people ready to make it happen.
Check our FAQ for quick answers or reach out via phone to our support center. Here, we also offer additional inquiry forms to help you connect with the appropriate Henkel expert.