Skip to Content
Henkel Adhesive Technologies
+1-855-436-5354

Henkel Adhesive Technologies
+1-855-436-5354
Loctite Technology Cluster Brand for Product Detail Pages

Part no. (SKU/IDH):
483624

IDH Name:
LOCTITE 454 TB2GEN/SP

Instant adhesives

LOCTITE® 454

Your go-to fast-fixturing gel

A 1-part, surface-insensitive, fast-fixturing gel instant adhesive ideal for porous and acidic materials.

Technical (1)

RoHS (1)

Regulatory (1)

Part no. (SKU/IDH):
483624

IDH Name:
LOCTITE 454 TB2GEN/SP
Part no. (SKU/IDH) 483624
LOCTITE 454 TB2GEN/SP

Size Please make your selection 2 g

Packaging type Please make your selection Tube

WARNING!

Cancer and Reproductive Harm -
www.P65Warnings.ca.gov.

All marks used are trademarks and/or registered trademarks of Henkel and its affiliates in the US, Germany, and elsewhere.

Information

LOCTITE® 454 is a gel viscosity instant adhesive designed for large bond gaps and vertical applications. It provides for the rapid bonding of a wide range of materials including metals, elastomers and plastics, including difficult-to-bond plastics (PP, PE, PTFE) with the aid of a primer such as LOCTITE® SF 770. LOCTITE 454 is also suited for bonding porous materials such as wood, paper, leather and fabric. It is also ideal for all quick repair jobs.
  • Clear, universal instant adhesive gel
  • Operating temperatures from -54°C to 121°C (-65°F to 250°F)
  • Ideal for overhead application and vertical faces
  • Bonds similar or dissimilar substrate combinations of wood, metals, ceramics, most plastics
  • Reduced hazardous ingredients for improved occupational safety
  • Product category:
  • Instant adhesives

Technologies:

  • Cyanoacrylate
  • Application method:
  • Dispense system; Manual

 

  • Applications:
  • Overhead/vertical application; Repairing

 

  • Color:
  • Clear

 

  • Cure type:
  • Moisture cure

 

  • Fixture time, Steel:
  • 45.0 s

 

  • Gap fill:
  • 0.25 mm

 

  • Key characteristics:
  • Fixture: fast fixture; General purpose; Tensile strength: high tensile strength; Viscosity: high viscosity

 

  • Operating temperature:
  • -54.0 °C - 121.0 °C (-65.0 °F - 250.0 °F)

 

  • Physical form:
  • Gel

 

  • Recommended for use with:
  • Elastomer; Metal; Plastic; Porous surface

 

  • Shear strength, Mild Steel (grit blasted):
  • 20.9 N/mm² (3030.0 psi)

 

     

       

         

           

             

               

                 

                   

                     

                       

                         

                           

                             

                              How to use

                                It is recommended to use the correct LOCTITE® cleaner for the surface to be bonded (such as LOCTITE® SF 7070) to degrease and clean surfaces prior to applying the adhesive.

                                To improve adhesion on difficult to bond plastic surfaces, apply LOCTITE® SF 770 to the bond area by brushing or dipping. Avoid applying excess primer. Allow the primer to dry.

                                If cure speed is too slow, use activator LOCTITE® SF 7452 or LOCTITE® SF 7455 (see cure speed vs activator graph in TDS). Apply activator to one bond surface by spray, brush or dipping (not primed surfaces). Allow the activator to dry.

                                Apply adhesive onto one side/part.

                                Assemble parts immediately. The parts should be accurately located as the short fixture time leaves little opportunity for adjustment. Bond should be held or clamped until the adhesive has fixtured.Hint: if necessary, excess product can be cured by activator LOCTITE® SF 7452. Spray or drop activator onto excess product.

                                For precise dispensing of small amounts of adhesive, the use of dispensing needles is recommended.

                              FAQ

                                Although HQ is not part of the product formula for LOCTITE® 454, trace amounts are possible due to shared manufacturing processes and/or select raw material impurities. Hence, Henkel has taken the additional step of introducing a low specification level (< 50 PPM for HQ) and each batch is now checked for this after manufacture.

                                This is called blooming. This often occurs when there is an excessive amount of product being applied. To avoid blooming, use proper ventilation, less product, lower humidity, use a primer/accelerator, or a low bloom product.

                                Yes, instant adhesives should be stored in the refrigerator prior to opening, but DO NOT refrigerate them once they have already been opened. After opening, the product should be used within 30 days for best performance.

                                All necessary H&S measures and PPE (personal protection equipment) requirements can be found on the product material safety data sheet, all of which are available via our website.

                                This is a result of stress cracking. Uncured liquid CA remaining on some plastic substrate (such as polycarbonate, acrylic, and polysulfone) in a stressed condition may cause the formation of cracks in the plastic. Some remedies for avoiding/minimizing stress cracking are closing the bond joint quickly, use reinforced grades of plastic, anneal parts, or speed the cure of the CA with accelerator (or light for light curing CA products only).

                                Henkel has several products available with varying levels of NSF® approval, amongst others. Please contact the Henkel sales or technical teams with your requirements.

                              You might also need

                              • Accessories
                                LOCTITE SF 770 Primer - 1.75 fl oz Bottle (IDH 2759219)

                                Adhesive primers

                                LOCTITE® SF 770

                                Instant adhesive primer for difficult-to-bond materials
                                Out of stock

                              Recently viewed products

                              Looking for solutions? We can help

                              Our experts are here to learn more about your needs.
                              • A black female employee scans packages in a warehouse. In the foreground there is the woman with the yellow scanner, in the background scaffolding can be seen.

                                Submit an order request
                              • A female call-center employee smiling and wearing a headset while working in an office.

                                Request a consultation
                              Looking for more support options?

                              Our support center and experts are ready to help you find solutions for your business needs.
                              Visit support center

                              Henkel Adhesive Technologies
                              Company
                              About us
                              Locations
                              Careers
                              News
                              eShop login
                              eShop access request
                              Sustainability
                              Global Innovation Centers
                              Help
                              FAQs
                              Find a TDS
                              Find a SDS
                              Find a certificate
                              Find a distributor
                              Contact us
                              Resource center
                              Product search
                              Technical library
                              Case studies
                              White papers
                              Webinars
                              Brochures
                              eBooks
                              Social media
                              ⓒ 2026 Henkel Corporation. ALL RIGHTS RESERVED
                              You are on a United States website