Skip to Content
Henkel Adhesive Technologies
Recent searches

      Henkel Adhesive Technologies
      Loctite Technology Cluster Brand for Product Detail Pages

      Part no. (SKU/IDH):
      135433

      IDH Name:
      LOCTITE® 403, 20 g Bottle

      Instant adhesives

      LOCTITE® 403

      Low-bloom, medium-viscosity adhesive

      A 1-part, low-odor, low-bloom, medium-viscosity instant adhesive ideal for aesthetic applications.

      Technical (1)

      RoHS (1)

      Regulatory (1)

      Part no. (SKU/IDH):
      135433

      IDH Name:
      LOCTITE® 403, 20 g Bottle
      Part no. (SKU/IDH) 135433
      LOCTITE® 403, 20 g Bottle

      Size Please make your selection 20 g

      WARNING!

      Cancer and Reproductive Harm -
      www.P65Warnings.ca.gov.

      All marks used are trademarks and/or registered trademarks of Henkel and its affiliates in the US, Germany, and elsewhere.

      Information

      LOCTITE® 403 is a low-odor, low-bloom instant adhesive. This medium viscosity adhesive is ideal for applications where odor and/or blooming are a concern. LOCTITE 403 provides for rapid bonding of metals, elastomers and plastics, including difficult-to-bond plastics (PP, PE, PTFE) when used in conjunction with a primer such as LOCTITE® SF 770.
      • Low-odor for applications where vapor control is vital
      • Low-bloom for cosmetic applications
      • Medium viscosity for gaps of approximately 0.20 mm (0.008")
      • Bonds plastics, rubbers and metals
      • Product category:
      • Instant adhesives

      Technologies:

      • Cyanoacrylate
      • Application method, Recommended:
      • Dispense system; Manual

       

      • Applications, Recommended:
      • Bonding close fitting parts

       

      • Color:
      • Ultra clear

       

      • Fixture time, Steel:
      • 30.0 sec.

       

      • Gap fill:
      • 0.2 mm

       

      • Key characteristics, Recommended:
      • Bloom: low bloom; Gap filling; Odor: low odor; Surface insensitive; Viscosity: medium viscosity

       

      • Operating temperature:
      • -40.0 °C - 80.0 °C (-40.0 °F - 175.0 °F)

       

      • Shear strength, Mild Steel (grit blasted):
      • 20.3 N/mm² (2950.0 psi)

       

      • Viscosity:
      • 1200.0 mPa·s (cP)

       

         

           

             

               

                 

                   

                     

                       

                         

                           

                             

                               

                                 

                                   

                                     

                                      How to use

                                        It is recommended to use the correct LOCTITE® cleaner for the surface to be bonded (such as LOCTITE® SF 7070) to degrease and clean surfaces prior to applying the adhesive.

                                        To improve adhesion on difficult to bond plastic surfaces, apply LOCTITE® SF 770 to the bond area by brushing or dipping. Avoid applying excess primer. Allow the primer to dry.

                                        If cure speed is too slow, use activator LOCTITE® SF 7452 or LOCTITE® SF 7455 (see cure speed vs activator graph in TDS). Apply activator to one bond surface by spray, brush or dipping (not primed surfaces). Allow the activator to dry.

                                        Apply adhesive onto one side/part.

                                        Assemble parts immediately. The parts should be accurately located as the short fixture time leaves little opportunity for adjustment. Bond should be held or clamped until the adhesive has fixtured.Hint: if necessary, excess product can be cured by activator LOCTITE® SF 7452. Spray or drop activator onto excess product.

                                        For precise dispensing of small amounts of adhesive, the use of dispensing needles is recommended.

                                      FAQ

                                        Low odor/low bloom instant adhesives are significantly higher in molecular weight than traditional instant adhesives. Therefore, they are less prone to become airborne when left open to air and consequently produce little to no blooming, or “frosting” effect on assemblies. They also tend to have lower odor during use.

                                        This is called blooming. This often occurs when there is an excessive amount of product being applied. To avoid blooming, use proper ventilation, less product, lower humidity, use a primer/accelerator, or a low bloom product.

                                        This is a result of stress cracking. Leaving uncured liquid CA remaining on some plastic substrates (such as polycarbonate, acrylic, and polysulfone) in a stressed condition may cause the formation of cracks in the plastic. Some remedies for avoiding/minimizing stress cracking are closing the bond joint quickly, use reinforced grades of plastic, anneal parts, or speed the cure of the CA with accelerator (or light for light curing CA products only).

                                        Yes, CA’s should be stored in the refrigerator prior to opening, but DO NOT refrigerate them once they have already been opened. After opening, CA's should be used within 30 days for best performance.

                                        Henkel has several products available with varying levels of NSF® approval, amongst others. Please contact the Henkel sales or technical teams with your requirements.

                                        All necessary H&S measures and PPE (personal protection equipment) requirements can be found on the product material safety data sheet, all of which are available via our website.

                                      You might also need

                                      • Complementary
                                        LOCTITE PU20 Digital Peristaltic Dispenser (IDH 2265279)

                                        Dispense systems

                                        LOCTITE® PU20 Digital Peristaltic Dispenser

                                        Precision dispensing of dots and beads

                                        From

                                        $1,981.83
                                        In stock

                                      • Complementary
                                        LOCTITE Dispense Needle, HDPE Tapered Tip, helical thread, UV light block additive, 1-1/4 in, IDH 600959 (legacy 98391)

                                        Consumables and supplies

                                        LOCTITE® High Precision HDPE Dispense Needles, Tapered Tip

                                        Your go-to tip for precise, easy application of adhesives

                                        From

                                        $30.14
                                        In stock

                                      • Complementary
                                        LOCTITE Needle Tip Variety Showcase Kit, legacy 98439 (IDH 687636)

                                        Consumables and supplies

                                        LOCTITE® Variety Kit for Needles and Tips

                                        Sampling box for dispense tips and needles

                                        From

                                        $49.76
                                        In stock

                                      Recently viewed products

                                      Request a consultation

                                      Unplanned downtime or lower plant productivity can prevent you from achieving the manufacturing excellence that you are looking for. Consult with our experts to find ways to make your machine more reliable and reduce unplanned downtime to save costs.
                                      Contact an expert

                                      Henkel Adhesive Technologies
                                      Company
                                      About us
                                      Locations
                                      Careers
                                      News
                                      Current Customer eShop
                                      Sustainability
                                      Help
                                      FAQs
                                      Find a TDS
                                      Find a SDS
                                      Find a distributor
                                      Contact us
                                      Resource center
                                      Product search
                                      Technical library
                                      Case studies
                                      White papers
                                      Webinars
                                      Brochures
                                      eBooks
                                      Social media
                                      ⓒ 2025 Henkel Corporation. ALL RIGHTS RESERVED
                                      You are on a United States website