Part no. (SKU/IDH):
135412
IDH Name:
LOCTITE® AA 352, 50 ml Bottle
Legacy IDH:
35241
Light curing adhesives
High viscosity, chemical-resistant adhesive
Transparent, high-viscosity acrylic-based UV- heat- or activator-cure adhesive with enhanced chemical resistance and toughness. Ideal for tough bonds on glass, metals and ceramics.
Part no. (SKU/IDH):
135412
IDH Name:
LOCTITE® AA 352, 50 ml Bottle
Legacy IDH:
35241
Size Please make your selection 50 ml
All marks used are trademarks and/or registered trademarks of Henkel and its affiliates in the US, Germany, and elsewhere.
-
{{#data}}
{{#distributor.isVisible}}
{{#distributor.isExpanded}}
-
{{^distributor.unique}}
{{/distributor.unique}}
{{#distributor.onShelf}} {{#distributor.withSpecialPrice}} {{distributor.prices.specialWithSymbol}}
{{distributor.prices.regularWithSymbol}}
{{#distributor.withoutSpecialPrice}} {{distributor.prices.regularWithSymbol}}
{{#distributor.anyInStock}} {{/distributor.anyInStock}}In stock {{#distributor.notInStock}} {{/distributor.notInStock}}Out of stock {{#distributor.notOnShelf}} {{^distributor.notInStock}} {{#distributor.onShelf}} All available stock is already in cartYou have reached the maximum order quantity availableFor industrial use only. Not intended for consumer sale or use.
Large volume or special order?
{{#distributor.notOnShelf}} {{/distributor.notInStock}}{{#distributor.notInStock}} {{#distributor.onShelf}} {{#distributor.notInStock}} {{/distributor.onShelf}}There was a problem with your request. Please try again or contact us directly.
- Description
- Technical specification
- Question & answer
LOCTITE® AA 352 is a transparent, acrylic-based, high-viscosity UV-cure adhesive with excellent resistance to chemicals and humidity. Once cured by UV light, activator or heat, it is highly resistant to vibration and impact forces. Ideal for the tough bonding, sealing or coating of metal and glass components in industrial applications, e.g. unitizing electrical devices, appliance parts and decorative components.
-
Resistant to humidity and chemicals
-
Resistant to vibration and impact forces
-
Ideal for glass, metals and ceramics
-
Cured with UV light, heat or activator
- Product category:
- Light curing adhesives
Technologies:
-
Light curing acrylic adhesives
-
Acrylates, anaerobic cure
- Color:
- Amber; Translucent
- Key characteristics:
- Wavelength for cure: UV
- Viscosity, Brookfield - RVT, @ 25.0 °C:
- 15000.0 mPa·s (cP) - 26000.0 mPa·s (cP)
How to use
For best performance, bond surfaces should be clean and free from contaminants, including grease.
Cure rate is dependent on lamp intensity, distance from light source, depth of cure needed or bondline gap and light transmittance of the substrate through which the radiation must pass.
Cooling should be provided for temperature sensitive substrates such as thermoplastics. Plastic grades should be checked for risk of stress cracking when exposed to liquid adhesive. Excess adhesive can be wiped away with organic solvent(e.g. Acetone). Bonds should be allowed to cool before subjecting to any service loads.
This product is light sensitive; exposure to daylight, UV light and artificial lighting should be kept to a minimum during storage and handling. The product should be dispensed from applicators with black feedlines.
FAQ
Yes, For best performance, bond surfaces should be clean and free from contaminants. Cleaning parts prior to bonding should involve residue-free cleaners.
LOCTITE® AA 352 should be stored in the unopened container in a dry location, with storage information possibly indicated on the product container labeling. Its optimal storage temperature is 8°C to 21°C, and storage below 8°C or above 28°C can adversely affect product properties. Material removed from containers may be contaminated during use.
defined as the time required for the adhesive/activator combination to develop sufficient
strength in a 0.5" by 1.0" (13 mm by 25 mm) bond between two steel lap shears to support a 6.6 lb. (3 kg) weight (13.2 psi) for 10 seconds, is 12 seconds, with 6 mW/cm², measured at 365 nm, on glass with black light, using a Zeta® 7500 light source. It is 5 seconds, with 100 mW/cm², measured at 365 nm, and 5 seconds, with 100 mW/cm², measured at 405 nm, on glass with LED flood light.
The tensile strength at break of the cured product is 24.4 N/mm², tested according to ISO 527-3.
LOCTITE® AA 352 is recommended for use in appliance components, appliances, decorative components, decorative parts, and electrical devices applications.
-
{{#data}}
{{#distributor.isVisible}}
{{#distributor.isExpanded}}
-
{{^distributor.unique}}
{{/distributor.unique}}
{{#distributor.onShelf}} {{#distributor.withSpecialPrice}} {{distributor.prices.specialWithSymbol}}
{{distributor.prices.regularWithSymbol}}
{{#distributor.withoutSpecialPrice}} {{distributor.prices.regularWithSymbol}}
{{#distributor.anyInStock}} {{/distributor.anyInStock}}In stock {{#distributor.notInStock}} {{/distributor.notInStock}}Out of stock {{#distributor.notOnShelf}} {{^distributor.notInStock}} {{#distributor.onShelf}} All available stock is already in cartYou have reached the maximum order quantity availableFor industrial use only. Not intended for consumer sale or use.
Large volume or special order?
{{#distributor.notOnShelf}} {{/distributor.notInStock}}{{#distributor.notInStock}} {{#distributor.onShelf}} {{#distributor.notInStock}} {{/distributor.onShelf}}There was a problem with your request. Please try again or contact us directly.
Every question, request, and challenge is an opportunity for us to help your business perform. And we have all the right people ready to make it happen.
Check our FAQ for quick answers or reach out via phone to our support center. Here, we also offer additional inquiry forms to help you connect with the appropriate Henkel expert.