Part no. (SKU/IDH):
2167570
IDH Name:
BERGQUIST® SIL PAD® TSP 1600S
Thermal SIL PAD Materials
Electrically insulating pad – general purpose
This thermally conductive, silicone insulator pad is designed for low-pressure applications. Good cut-through, low thermal impedance.
Part no. (SKU/IDH):
2167570
IDH Name:
BERGQUIST® SIL PAD® TSP 1600S
All marks used are trademarks and/or registered trademarks of Henkel and its affiliates in the US, Germany, and elsewhere.
-
{{#data}}
{{#distributor.isVisible}}
{{#distributor.isExpanded}}
- {{^distributor.unique}} {{/distributor.unique}} {{/distributor.isExpanded}} {{^distributor.isExpanded}} {{/distributor.isExpanded}} {{/distributor.isVisible}} {{/data}}
- Description
- Technical specification
BERGQUIST® SIL PAD® TSP 1600S is a silicone-based, thermally conductive and electrically insulating general purpose thermal interface solution. It is fibreglass reinforced, with a smooth and highly compliant surface with high thermal conductivity. These features minimise thermal resistance and maximise thermal performance.
-
Thermal impedance: 0.61°C (33°F) -in2/W @ 50 psi
-
Electrically isolating
-
Value material
-
Smooth and highly compliant surface
-
Low mounting pressures
-
For information on our thermal management materials’ UL certifications, please refer to UL file E59150
- Product category:
- Thermal SIL PAD Materials
Technologies:
-
Thermal management, sil pads
-
Thermal management, gap pads
- Carrier type:
- Fiberglass
- Color:
- Pink
- Flame rating:
- V-0
- Operating temperature:
- -60.0 °C - 180.0 °C
- Standard thickness:
- 0.229 mm
- Thermal conductivity:
- 1.6 W/mK
FAQ
BERGQUIST® SIL PAD TSP 1600 is specifically formulated to provide excellent thermal performance for discrete semiconductor applications that use low clamping pressures (e.g., spring clips at 10 to 50 psi.). In contrast, if you are designing for higher clamping pressure applications using discrete semi-conductors (e.g., 50 to 100 psi.), it is likely that you will prefer the combination of high thermal performance and cut-through resistance inherent in BERGQUIST® SIL PAD TSP 1600S material.
Each application has specific characteristics (e.g., surface finish, flatness tolerances, high pressure requirements, potential burrs, etc.) that determine which SIL PAD product will optimize thermal performance. Select a minimum of two pads that best fit the application, then conduct testing to determine which material performs the best.
BERGQUIST® SIL PAD TSP 1680 is specifically formulated to provide exceptional cut-through and crush resistance in combination with excellent heat transfer and dielectric properties. BERGQUIST® SIL PAD TSP 1680 has a proven history of reliability in high-pressure applications where surface imperfections such as burrs and dents are inherently common. These applications often include heavily machined metal surfaces manufactured from extrusions or castings. BERGQUIST® SIL PAD TSP 1600S carries a high level of crush resistance and is more likely to be used in burr-free or controlled-surface finish applications
The ISO certification is the adoption of a quality management system that is a strategic decision of the organization. This International Standard specifies requirements for a quality management system where an organization: a) needs to demonstrate its ability to consistently provide product that meets customer and applicable regulatory requirements, and b) aims to enhance customer satisfaction through the effective application of the system, including processes for continual improvement of the system and the assurance of conformity to customer and regulatory requirements.
-
{{#data}}
{{#distributor.isVisible}}
{{#distributor.isExpanded}}
- {{^distributor.unique}} {{/distributor.unique}} {{/distributor.isExpanded}} {{^distributor.isExpanded}} {{/distributor.isExpanded}} {{/distributor.isVisible}} {{/data}}
Our experts are here to learn more about your needs.
Our support center and experts are ready to help you find solutions for your business needs.