Part no. (SKU/IDH):
142581
IDH Name:
LOCTITE® 406, 500 g Bottle
Instant adhesives
Low-viscosity for tight fitting parts
A 1-part, exceptionally low-viscosity instant adhesive forming an ultra-thin adhesive film for smallest adhesive gaps in seconds (fast fixturing). Suitable for plastics and elastomeric materials.
Part no. (SKU/IDH):
142581
IDH Name:
LOCTITE® 406, 500 g Bottle
Size Please make your selection 500 g
All marks used are trademarks and/or registered trademarks of Henkel and its affiliates in the US, Germany, and elsewhere.
-
{{#data}}
{{#distributor.isVisible}}
{{#distributor.isExpanded}}
- {{^distributor.unique}} {{/distributor.unique}} {{/distributor.isExpanded}} {{^distributor.isExpanded}} {{/distributor.isExpanded}} {{/distributor.isVisible}} {{/data}}
- Description
- Technical specification
LOCTITE® 406 is a low-viscosity instant adhesive specially designed for the fast bonding of plastics and rubbers. It fixes the adhering components in seconds and hardens very quickly, forming an ultra-thin bond. The assembly of difficult-to-bond (PP, PE, PTFE) materials is possible when using the primer LOCTITE® SF 770.
-
Rapid fixture time on plastic and rubber, including EPDM
-
Assembles difficult-to-bond materials when LOCTITE SF 770 primer is used
-
Very low viscosity product for small gaps
-
Reduced hazardous ingredients for improved occupational safety
- Product category:
- Instant adhesives
Technologies:
-
Cyanoacrylate
- Application method:
- Dispense system; Manual
- Applications:
- Bonding elastomerics; Bonding plastic
- Color:
- Clear
- Cure type:
- Moisture cure
- Fixture time, Steel:
- 30.0 sec.
- Gap fill:
- 0.12 mm
- Key characteristics:
- Fixture: fast fixture; Viscosity: low viscosity
- Operating temperature:
- -40.0 °C - 120.0 °C (40.0 °F - 250.0 °F)
- Physical form:
- Liquid
- Recommended for use with:
- Elastomer; Plastic; Rubber
- Resin: Viscosity:
- 20.0 mPa·s (cP)
- Shear strength, Mild Steel (grit blasted):
- 15.5 N/mm² (2250.0 psi)
FAQ
Although HQ is not part of the product formula for LOCTITE® 406, trace amounts are possible due to shared manufacturing processes and/or select raw material impurities. Hence, Henkel has taken the additional step of introducing a low specification level (< 50 PPM for HQ) and each batch is now checked for this after manufacture.
Henkel has a number of products available with varying levels of NSF® and WRAS® approval, amongst others. Please contact the Henkel sales or technical teams with your requirements.
All adhesives are compatible with metal substrates although bond strength and durability will vary depending on the technology selected. Anaerobic adhesives may cause stress-cracking in some sensitive polymers and therefore should generally be avoided on plastic parts. Consult Henkel technical teams for further advice as needed.
All necessary H&S measures and PPE (personal protection equipment) requirements can be found on the product material safety data sheet, all of which are available via our website.
Yes, instant adhesives should be stored in the refrigerator prior to opening, but DO NOT refrigerate them once they have already been opened. After opening, the product should be used within 30 days for best performance.
-
{{#data}}
{{#distributor.isVisible}}
{{#distributor.isExpanded}}
- {{^distributor.unique}} {{/distributor.unique}} {{/distributor.isExpanded}} {{^distributor.isExpanded}} {{/distributor.isExpanded}} {{/distributor.isVisible}} {{/data}}
