Part no. (SKU/IDH):
2333708
IDH Name:
LOCTITE® VA40 Cyanoacrylate Volumetric Valve
Dispense systems
Precise dosing of instant adhesives with high repeatability
This high-precision, positive-displacement, volumetric metering valve is for dispensing cyanoacrylates (instant adhesives). For accurate, reliable, repeatable drop application.
Part no. (SKU/IDH):
2333708
IDH Name:
LOCTITE® VA40 Cyanoacrylate Volumetric Valve
All marks used are trademarks and/or registered trademarks of Henkel and its affiliates in the US, Germany, and elsewhere.
-
{{#data}}
{{#distributor.isVisible}}
{{#distributor.isExpanded}}
- {{^distributor.unique}} {{/distributor.unique}} {{/distributor.isExpanded}} {{^distributor.isExpanded}} {{/distributor.isExpanded}} {{/distributor.isVisible}} {{/data}}
- Description
- Technical specification
The LOCTITE® VA40 CA Volumetric Valve is designed for dispensing drops of cyanoacrylate (1.5 to 6 microliters, at a maximum cycle rate of 120/minute). An integral check valve improves speed and reliability of priming. An innovative displacement rod and sealing system mean you can rely on a long service lifetime before you need to think about rebuilding. Included in the box: (1) VA40 CA Volumetric Valve, (1) PTFE-lined tubing, 6.4mm (0.25") OD, 2 m (6 ft) long, (1) air line, 4mm (0.16") OD, blue, 2 m (6 ft), (1) air line, 4mm (0.16") OD, yellow, 2 m (6 ft), (1) needle sampling kit, (1) operating manual.
-
Precision, volumetric drop dispensing of LOCTITE cyanoacrylate (CA) adhesives
-
Long life seal design (> 1 million cycles) minimizes maintenance requirements
-
Quick and reliable priming
-
Easily fed from a syringe or pressure reservoir
- Product category:
- High precision dispense valves
Technologies:
-
Specialties, equipment
- Air input pressure:
- 60.0 psi - 100.0 psi
- Applications:
- Dispensing adhesives
- Dispense patterns:
- Dots; Drops
- Fluid pressure, Recommended:
- 30.0 psi - 70.0 psi
- Key characteristics:
- Stroke adjustment
- Operating type:
- High precision; Positive displacement; Volumetric
- Used to dispense:
- Cyanoacrylates; Light cure acrylics
- Viscosity:
- 1.0 mPa·s - 10000.0 mPa·s
-
{{#data}}
{{#distributor.isVisible}}
{{#distributor.isExpanded}}
- {{^distributor.unique}} {{/distributor.unique}} {{/distributor.isExpanded}} {{^distributor.isExpanded}} {{/distributor.isExpanded}} {{/distributor.isVisible}} {{/data}}
