Dispense systems
Precise dosing of instant adhesives with high repeatability
High precision, positive displacement, volumetric metering valves for dispensing cyanoacrylates (instant adhesives). For accurate, reliable, repeatable drop applications.
- Description
- Technical specification
The LOCTITE® VA40 CA Volumetric Valve is designed to dispense drops of cyanoacrylate (1.5 to 6 microliters, at a maximum cycle rate of 120/minute). It includes a check valve design, which improves the speed and reliability of priming. And an innovative displacement rod and sealing system means you can rely on a long dispensing life before you need to think about rebuilding.
-
Designed for precision, volumetric drop dispensing of LOCTITE cyanoacrylate (CA) adhesives
-
Long life seal design (> 1 million cycles) minimizes maintenance requirements
-
Quick and reliable priming
-
Easily fed from a syringe or pressure reservoir
-
Included in the box: (1) VA40 CA Dispense Valve, (1) PTFE lined tubing, 6.4mm OD, 2 m long, (1) air line, 4mm OD, blue, 2 m, (1) air line, 4mm OD, yellow, 2 m, (1) needle sample kit, (1) operating manual
Air input pressure:
60.0 psi - 100.0 psi
Applications:
Dispensing adhesives
Dispense patterns:
Dots,Drops
Fluid pressure, Recommended:
30.0 psi - 70.0 psi
Key characteristics:
Stroke adjustment
Operating type:
High Precision,Positive displacement,Volumetric
Used to dispense:
Cyanoacrylates,Light cure acrylics
Viscosity:
1.0 mPa·s - 10000.0 mPa·s
