Part no. (SKU/IDH):
142635
IDH Name:
LOCTITE® Handheld Pneumatic Applicator, Finger Switch
Dispense systems
For timed dispensing of adhesives
These ergonomically designed handheld valves are for timed dispensing of 1-part adhesives.
-
2D model for LOCTITE Handheld Pneumatic Dispense Valve, Finger Switch, 142635, dwg
-
2D model for LOCTITE Handheld Pneumatic Dispense Valve, Finger Switch, 142635, dxf
-
2D model for LOCTITE Handheld Pneumatic Dispense Valve, Foot Switch, 88643, dxf
-
2D model for LOCTITE Handheld Pneumatic Dispense Valve, Foot Switch, 88643, dwg
Part no. (SKU/IDH):
142635
IDH Name:
LOCTITE® Handheld Pneumatic Applicator, Finger Switch
Operating type Please make your selection Finger Switch
All marks used are trademarks and/or registered trademarks of Henkel and its affiliates in the US, Germany, and elsewhere.
-
{{#data}}
{{#distributor.isVisible}}
{{#distributor.isExpanded}}
- {{^distributor.unique}} {{/distributor.unique}} {{/distributor.isExpanded}} {{^distributor.isExpanded}} {{/distributor.isExpanded}} {{/distributor.isVisible}} {{/data}}
- Description
- Technical specification
LOCTITE® Pneumatic Handheld Valves can be controlled by foot switch or hand switch and are ergonomically designed for comfort, application control, and a low actuation force to reduce hand fatigue. They incorporate a suck-back feature, which prevents dripping or stringing. A 21 cm (8"), black, 6.35 mm (0.25") feed line delivers products up to 15,000 mPa·s viscosity through the valves. An optional feed line upgrade kit will allow dispensing of adhesives up to 80,000 mPa·s. These valves must be used in conjunction with a controller and product reservoir.
-
Suck-back feature for accuracy and control
-
Operational with manual, semiautomatic and automatic controllers
-
Included in the box: (1) handheld applicator, (1) pencil holder, (1) needle kit, (1) operating manual.
- Product category:
- Handheld dispense valves
Technologies:
-
Specialties, equipment
- Air input pressure, Recommended:
- 60.0 psi - 60.0 psi
- Applications:
- Dispensing adhesives
- Key characteristics, Recommended:
- Stroke adjustment; Vacuum suck-back; Viscosity: low to medium viscosity
- Used to dispense, Recommended:
- Light cure acrylics; Retaining compounds; Threadlockers
- Viscosity, Recommended:
- 0.0 mPa·s - 15000.0 mPa·s
-
{{#data}}
{{#distributor.isVisible}}
{{#distributor.isExpanded}}
- {{^distributor.unique}} {{/distributor.unique}} {{/distributor.isExpanded}} {{^distributor.isExpanded}} {{/distributor.isExpanded}} {{/distributor.isVisible}} {{/data}}
