Thread sealants
White, general purpose thread sealant for an instant low-pressure seal
This low-strength, high-viscosity thread sealant is UL classified and ideal for tapered, coarse threads. It’s specially formulated to offer easy assembly and removal.
All marks used are trademarks and/or registered trademarks of Henkel and its affiliates in the US, Germany, and elsewhere.
Size Please make your selection 50 ml
- Description
- Technical specification
LOCTITE® 567™ is a white, 1-part thread sealant designed for the locking and sealing of tapered metal pipe threads and fittings. As an anaerobic-curing thread sealant, it cures when confined in the absence of air between close fitting metal surfaces and prevents loosening and leakage from shock and vibration. It's high lubricating properties prevent galling on stainless steel, aluminum and all other metal pipe threads and allow ease of disassembly. The product offers high temperature performance and oil tolerance. It tolerates minor surface contaminations from various oils, such as cutting, lubrication, anti-corrosion and protection fluids.
-
One component - clean and easy to apply
-
Doesn’t creep, shrink or block systems
-
Ideal for metal pipes and fittings
-
UL MH8007 & ULC MH27131 Classified
-
Certified to ANSI/NSF Standard 61 for potable water systems
-
Provides an instant low pressure seal
Agency approvals / certificates / specifications:
UL
Applications:
Pipe Sealing,Thread Sealing
Breakaway torque, Steel, M10:
12.0 N·m (110.0 in./lb.)
Color:
Off White
Cure type:
Anaerobic Cure
Key characteristics:
Immediate Low Pressure Sealing,Oil Tolerant,Strength: Low Strength,Temperature: High Temperature,Thixotropic
Operating temperature:
-55.0 °C - 200.0 °C (-65.0 °F - 400.0 °F)
Physical form:
Paste
Recommended for use with:
Metal,Metal: Aluminum,Metal: Steel - Galvanized Steel,Metal: Steel - Stainless Steel,Thread Type: Coarse,Thread Type: Tapered
Viscosity, 20 RPM:
540000.0 mPa·s
How to use
It is recommended to use LOCTITE® SF 7063 or LOCTITE® SF 7070 Cleaner & Degreaser to degrease and clean surfaces prior to applying adhesive.
If cure speed is too slow due to passive metals (stainless steel, aluminum and plated metals) or low temperatures (below 5°C), use LOCTITE® SF 7649 activator. Allow to dry.
Starting one to two threads from leading edge of pipe, apply a 360° band to cover at least three thread roots. For bigger threads, apply both on male and female threads. (Recommended dispensing equipment: LOCTITE® Dial-a-Seal® Dispenser)
Assemble fittings using wrench tightening in accordance with manufacturers' recommendations.
Disassemble with standard hand tools. If not possible, apply localized heat to approximately 500°F and disassemble while hot.
FAQ
The standard continuous operating temperature range for LOCTITE® anaerobic adhesives is -65° to +300°F (-55°C to +150°C). Depending on the specific application requirements, high-performance grades are also available offering increased temperature resistance. Please consult with the Henkel technical team for availability and grade selection.
Yes, Henkel anaerobic adhesives become highly resistant thermoset polymers once cured, making them suitable for a vast number of applications. Many Henkel silicone adhesives offer excellent resistance to standard media like water/glycol, amongst other solutions. Consult our online product resources or contact our technical teams for further information.
All adhesives are compatible with metal substrates although bond strength and durability will vary depending on the technology selected. Anaerobic adhesives may cause stress-cracking in some sensitive polymers and therefore should generally be avoided on plastic parts. Consult Henkel technical teams for further advice as needed.
All necessary H&S measures and PPE (personal protection equipment) requirements can be found on the product material safety data sheet, all of which are available via our website.
-
{{#data}}
{{#distributor.isVisible}}
{{#distributor.isExpanded}}
-
{{^distributor.unique}}
{{/distributor.unique}}