A hybrid is a mix of two adhesive chemistries. For example, the Loctite 4070 is cyanoacrylate/methacrylate.
Loctite® HY 4070 cannot be dispensed on automatic equipment. It is intended for dispensing it directly from the ready to use pack for smaller applications, like repairs.
Yes, Loctite® HY 4080/4080GY/4090 can be dispensed using the following equipment:
MM10 50 ml Dual Cartridge Dispenser, Pressure / time system- Maximum cycle time is limited by mixing tip life and in addition drop size versus cycle time must be thoroughly checked to obtain acceptable stability of dispensed amount. MM25 Dual Volumetric Rotor Pump Volumetric system -Length and diameter of the feed line must be considered due to B component viscosity.
Yes, hybrids are two-part products so you have to make sure that both sides are flowing!
Not recommended.
Hybrid adhesives do not need refrigeration. You can refrigerate before you open them, but don’t put them back in the refrigerator.
Our support center and experts are ready to help you find solutions for your business needs.
