Metal rebuilding materials
Versatile, steel-filled, kneadable epoxy stick for emergency repairs
This 2-part, steel-filled epoxy repair putty is easy to use and stops leaks in pipes and tanks, fills oversized bolt holes, smooths welds, and repairs non-structural defects in castings or holes in tanks.
All marks used are trademarks and/or registered trademarks of Henkel and its affiliates in the US, Germany, and elsewhere.
- Description
- Technical specification
- Ratings & reviews
- Question & answer
LOCTITE® EA 3463 is a versatile, easy to use, steel-filled epoxy kneadable stick. It is applied like a putty and, when cured, exhibits high compressive strength and great adhesion to most surfaces. It has an operating temperature range of -55°C to 120°C (-67°F to 248°F), cures in 10 minutes, adheres to most damp surfaces and will even cure under water. Use it to stop leaks in pipes and tanks, fill oversized bolt holes, smooth welds, and repair non-structural defects in castings or holes in tanks.
-
Steel-filled kneadable stick
-
Operating temperature: -30°C to 120°C (-22°F to 248°F)
-
For emergency repair of tanks, pipes & castings
-
Cures in 10 minutes
-
Cures on damp surfaces and under water
- Product category:
- Metal rebuilding materials
Technologies:
-
2K liquid
-
Thermosets, 2K general epoxy
- Application method:
- Manual
- Applications:
- Repairing
- Cure type:
- Room temperature (ambient) cure,Two component mix
- Fixture time:
- 10.0 min.
- Mixed: Color:
- Black
- Mixed: Key characteristics:
- Compressive strength: high,Cure speed: fast cure,Emergency repair,Kneadable,Underwater curing
- Physical form:
- Putty
- Recommended for use with:
- Metal
- Work life:
- 3.0 min.
How to use
It is recommended to use the correct LOCTITE® cleaner for the surface to be bonded (such as LOCTITE® SF 7070) to degrease and clean surfaces prior to applying the adhesive.
Use gloves - do not mix with bare hands. Cut required amount of material from stick. Remove clear plastic wrapper from cut section. To mix, first twist the material to produce a spiral pattern of resin and hardener. Next, knead material for 2 to 3 minutes or until a uniform color is achieved.
Firmly apply for patch, repair or bonding. For a smooth finish, wet a cloth or gloved finger with water and smooth.
FAQ
This product can be applied to wet surfaces, but the bond strength will be lower.
