Mold release agents
Proprietary, white, water-based emulsion for releasing large scale parts and other high performance composite structures.
A proprietary, white, water-based emulsion designed for releasing large scale parts and other high performance composite structures.
All marks used are trademarks and/or registered trademarks of Henkel and its affiliates in the US, Germany, and elsewhere.
- Description
- Technical specification
- Ratings & reviews
- Question & answer
LOCTITE® FREKOTE® C-600 mold release agent is a proprietary, water-based emulsion developed for releasing large scale parts, e.g., wind blades, and is ideal for numerous other high performance composite structures. When fully cured, this product chemically bonds to the mold surface to form a thin, inert, thermally stable coating. It is designed to be applied and cured at ambient shop temperatures.
-
Non-flammable, no flash point
-
Autoclaved resistant at either +121°C or +177°C
-
Application and curing at room temp.
-
Large scale parts
-
Multiple releases
- Product category:
- Mold release agents
Technologies:
-
Specialties, others
-
Specialties, primers and coatings
- Drying time between coats, @ 20.0 °C:
- 15.0 min.
- Finish reflection:
- Matte
- Full cure time, @ 20.0 °C:
- 40.0 min.
- Key characteristics:
- Water based
- Recommended for use with:
- Composite: advanced composites
