Part no. (SKU/IDH):
2264448
IDH Name:
LOCTITE® HY 4070, 11 g Twin Syringe
Structural adhesives
General-purpose, high-performance bonder for wide range of substrates
A 2-part, fast-fixturing adhesive with excellent moisture and temperature resistance.
Part no. (SKU/IDH):
2264448
IDH Name:
LOCTITE® HY 4070, 11 g Twin Syringe
All marks used are trademarks and/or registered trademarks of Henkel and its affiliates in the US, Germany, and elsewhere.
-
{{#data}}
{{#distributor.isVisible}}
{{#distributor.isExpanded}}
-
{{^distributor.unique}}
{{/distributor.unique}}
{{#distributor.onShelf}} {{#distributor.withSpecialPrice}} {{distributor.prices.specialWithSymbol}}
{{distributor.prices.regularWithSymbol}}
{{#distributor.withoutSpecialPrice}} {{distributor.prices.regularWithSymbol}}
{{#distributor.anyInStock}} {{/distributor.anyInStock}}In stock {{#distributor.notInStock}} {{/distributor.notInStock}}Out of stock {{#distributor.notOnShelf}} {{^distributor.notInStock}} {{#distributor.onShelf}} All available stock is already in cartYou have reached the maximum order quantity availableFor industrial use only. Not intended for consumer sale or use.
Large volume or special order?
{{#distributor.notOnShelf}} {{/distributor.notInStock}}{{#distributor.notInStock}} {{#distributor.onShelf}} {{#distributor.notInStock}} {{/distributor.onShelf}}There was a problem with your request. Please try again or contact us directly.
- Description
- Technical specification
- Question & answer
LOCTITE® HY 4070 Universal Bonder is a 2-part, fast-fixturing, cyanoacrylate/acrylic-hybrid adhesive that performs brilliantly on various substrates, including most plastics, rubbers and metals. It’s designed for the assembly of parts with bond gaps of up to 5 mm (0.2") and for applications where the complete cure of excess adhesive is a must. It has a gel consistency, which prevents adhesive flow even on vertical surfaces. Ideal for applications where temperature and moisture resistance are required. Best application results are achieved with use of the LOCTITE® cyanoacrylate mixing nozzle.
-
Fast fixturing
-
Moisture resistant
-
Temperature resistance: -40°C to 100°C (-40 to 212°F)
-
Gap filling up to 5 mm (0.2")
-
Gel consistency suitable for overhead applications
- Product category:
- Structural adhesives
Technologies:
-
Specialties, others
-
Cyanoacrylate
-
Acrylates, anaerobic cure
- Application method:
- Dispense system
- Applications:
- Bonding dissimilar materials; Bonding plastic; Bonding rubber; Construction; Direct bonding; Edge bonding; Interior repairs; Structural bonding
- Cure type:
- Room temperature (ambient) cure; Two component mix
- FEA (finite element analysis):
- Finite strain; Viscoelastic
- Fixture time, Aluminum (etched), 0.5mm gap:
- < 60.0 s
- Gap fill:
- 5.0 mm
- Hardener: Color:
- Clear
- Hardener: Viscosity, cone & plate, @ 25.0 °C:
- 1.0 mPa·s (cP) - 30.0 mPa·s (cP)
- Mix ratio, by volume:
- 10 : 1
- Mixed: Key characteristics:
- Cure speed: ultra fast cure; Gap filling; Moisture resistant; Multipurpose
- Mixed: Operating temperature:
- -40.0 °C - 100.0 °C (-40.0 °F - 212.0 °F)
- Number of components:
- 2 part
- Physical form:
- Gel
- Recommended for use with:
- Composite; Composite: advanced composites; Dry surface; Elastomer: highly filled elastomer; Epoxy; Fiberboard; Gel coat; Laminate; Metal; Non-gel coat; Painted surface; Phenolic; Plastic; Rubber; Thermoplastic; Thermoset; Urethane: cast urethane; Vinyl; Wood
- Resin: Casson viscosity, cone & plate, @ 25.0 °C:
- 200.0 mPa·s (cP) - 1300.0 mPa·s (cP)
- Resin: Color:
- Yellow
- Shear strength, Steel (grit blasted):
- 25.0 N/mm² (3625.0 psi)
How to use
It is recommended to use the correct LOCTITE® cleaner for the surface to be bonded (such as LOCTITE® SF 7070) to degrease and clean surfaces prior to applying the adhesive.
Place plunger in the back of the cartridge. Remove cap from cartridge. Dispense a small amount so that material is coming out of both sides. Attach mix nozzle and dispense a bead at least half of the length of the nozzle. The material is ready to use.
Apply a bead of material to one of the surfaces to be bonded. Join the parts and fixture in a way to prevent movement of the part until handling strength is obtained.
FAQ
A hybrid is a mix of two adhesive chemistries. For example, the LOCTITE HY 4070 product is a cyanoacrylate/methacrylate mix.
Yes, hybrids are two-part products. Bumping and purging ensures product is flowing from both sides and mix at the proper mix ratio.
LOCTITE® HY 4070 is available in a 11gram 10:1 plastic syringe, supplied with a plunger and 4 nozzles. Additional nozzles are available in bags of 5 (IDH 1434516). LOCTITE® HY 4070 is also available in a 45gram 10:1 dual cartridges. Mix nozzles and dispense gun are not included with this package size.
No, it is not recommended to use LOCTITE HY 4070 for bonding to glass.
Refrigerated storage is not required for this adhesive. Refer to the product TDS for recommended storage.
Metals: all mentioned adhesives are compatible with metal substrates but with varying performance characteristics depending on the technology selected. Plastics: all adhesives other than anaerobic adhesives which may cause stress-cracking in some sensitive polymers. Consult Henkel technical team for further guidance.
All necessary H&S measures and PPE (personal protection equipment) requirements can be found on the product material safety data sheet, all of which are available via our website.
-
{{#data}}
{{#distributor.isVisible}}
{{#distributor.isExpanded}}
-
{{^distributor.unique}}
{{/distributor.unique}}
{{#distributor.onShelf}} {{#distributor.withSpecialPrice}} {{distributor.prices.specialWithSymbol}}
{{distributor.prices.regularWithSymbol}}
{{#distributor.withoutSpecialPrice}} {{distributor.prices.regularWithSymbol}}
{{#distributor.anyInStock}} {{/distributor.anyInStock}}In stock {{#distributor.notInStock}} {{/distributor.notInStock}}Out of stock {{#distributor.notOnShelf}} {{^distributor.notInStock}} {{#distributor.onShelf}} All available stock is already in cartYou have reached the maximum order quantity availableFor industrial use only. Not intended for consumer sale or use.
Large volume or special order?
{{#distributor.notOnShelf}} {{/distributor.notInStock}}{{#distributor.notInStock}} {{#distributor.onShelf}} {{#distributor.notInStock}} {{/distributor.onShelf}}There was a problem with your request. Please try again or contact us directly.
Every question, request, and challenge is an opportunity for us to help your business perform. And we have all the right people ready to make it happen.
Check our FAQ for quick answers or reach out via phone to our support center. Here, we also offer additional inquiry forms to help you connect with the appropriate Henkel expert.