Part no. (SKU/IDH):
233626
IDH Name:
LOCTITE® UK 3182, Part B, 1 gal Can
Potting compounds
Low-shrinkage potting compound
A polyurethane black hardener that when mixed with the appropriate resin forms a low-shrinkage, low-exotherm potting compound.
Part no. (SKU/IDH):
233626
IDH Name:
LOCTITE® UK 3182, Part B, 1 gal Can
All marks used are trademarks and/or registered trademarks of Henkel and its affiliates in the US, Germany, and elsewhere.
-
{{#data}}
{{#distributor.isVisible}}
{{#distributor.isExpanded}}
-
{{^distributor.unique}}
{{/distributor.unique}}
{{#distributor.onShelf}} {{#distributor.withSpecialPrice}} {{distributor.prices.specialWithSymbol}}
{{distributor.prices.regularWithSymbol}}
{{#distributor.withoutSpecialPrice}} {{distributor.prices.regularWithSymbol}}
{{#distributor.anyInStock}} {{/distributor.anyInStock}}In stock {{#distributor.notInStock}} {{/distributor.notInStock}}Out of stock {{#distributor.notOnShelf}} {{^distributor.notInStock}} {{#distributor.onShelf}} All available stock is already in cartYou have reached the maximum order quantity availableFor industrial use only. Not intended for consumer sale or use.
Large volume or special order?
{{#distributor.notOnShelf}} {{/distributor.notInStock}}{{#distributor.notInStock}} {{#distributor.onShelf}} {{#distributor.notInStock}} {{/distributor.onShelf}}There was a problem with your request. Please try again or contact us directly.
- Description
- Technical specification
- Question & answer
LOCTITE® UK 3182 is a black polyurethane hardener that when mixed with LOCTITE® UK 3173 polyurethane resin forms a low-shrinkage, low-exotherm potting compound. The two parts are mixed in a volume ratio of 1:5.2, or weight ratio of 13:87 (resin:hardener). The product cures in 90 minutes at 25°C (77°F) or, as an alternate cure schedule, in 30 minutes at 85°C (185°F).
-
Low-shrinkage/low exotherm properties when mixed
-
Work time of cured material of <7 min
-
Product cures in 30 minutes with heat
- Product category:
- Potting compounds
Technologies:
-
2K liquid
- Cure schedule, Alternate, @ 85.0 °C:
- 30.0 min
- Cure schedule, Recommended, @ 25.0 °C:
- 90.0 min
- Gel time:
- 14.0 min
- Key characteristics:
- Shrinkage: low shrinkage
- Number of components:
- 2 part
-
{{#data}}
{{#distributor.isVisible}}
{{#distributor.isExpanded}}
-
{{^distributor.unique}}
{{/distributor.unique}}
{{#distributor.onShelf}} {{#distributor.withSpecialPrice}} {{distributor.prices.specialWithSymbol}}
{{distributor.prices.regularWithSymbol}}
{{#distributor.withoutSpecialPrice}} {{distributor.prices.regularWithSymbol}}
{{#distributor.anyInStock}} {{/distributor.anyInStock}}In stock {{#distributor.notInStock}} {{/distributor.notInStock}}Out of stock {{#distributor.notOnShelf}} {{^distributor.notInStock}} {{#distributor.onShelf}} All available stock is already in cartYou have reached the maximum order quantity availableFor industrial use only. Not intended for consumer sale or use.
Large volume or special order?
{{#distributor.notOnShelf}} {{/distributor.notInStock}}{{#distributor.notInStock}} {{#distributor.onShelf}} {{#distributor.notInStock}} {{/distributor.onShelf}}There was a problem with your request. Please try again or contact us directly.
Every question, request, and challenge is an opportunity for us to help your business perform. And we have all the right people ready to make it happen.
Check our FAQ for quick answers or reach out via phone to our support center. Here, we also offer additional inquiry forms to help you connect with the appropriate Henkel expert.