Repair kits
Instant component bonding, O-Ring Kit
This emergency repair kit contains rubber cords, LOCTITE 404 and tools to create customized O-rings.
All marks used are trademarks and/or registered trademarks of Henkel and its affiliates in the US, Germany, and elsewhere.
228171
-
LOCTITE® 404 O-Ring Kit, Equipment MixedLOCTITE MR 6222 known as Water Proofing Solution (135538)en_USIDH: 228171
-
LOCTITE® 404 O-Ring Kit, Equipment MixedLOCTITE 404 INSTANT ADHESIVE known as LOCTITE® 404™ INSTANT ADHESIVE (135465)en_USIDH: 228171
-
LOCTITE® 404 O-Ring Kit, Equipment MixedLOCTITE SF 75326 CLEAN UP SOLVENT known as Clean Up Solvent (234979)en_USIDH: 228171
-
LOCTITE® 404 O-Ring Kit, Equipment MixedLOCTITE SF 75326 CLEAN UP SOLVENT known as Clean Up Solvent (234979)en_USIDH: 228171
-
LOCTITE® 404 O-Ring Kit, Equipment MixedLOCTITE 404 INSTANT ADHESIVE known as LOCTITE® 404™ INSTANT ADHESIVE (135465)en_USIDH: 228171
-
LOCTITE® 404 O-Ring Kit, Equipment MixedLOCTITE MR 6222 known as Water Proofing Solution (135538)en_USIDH: 228171
- Description
- Technical specification
The LOCTITE O-Ring Kit is an emergency repair kit for making replacement O-rings on the spot. It is easy to handle and ready for use in just a few seconds. The kit contains five different sizes of nitrile rubber cord, a splicing jig, a safety knife and a bottle of LOCTITE 404. All you need!
-
Ideal for O-ring assembly
-
Designed for bonding of rubber (elastomeric) materials and plastics
-
Ideal for quick repairs
-
LOCTITE® 404 qualified to Commercial Item Description A-A-3097 (regional approval)
How to use
Clean cutting blade with LOCTITE SF 7063.
Cut the required lenght of cord. Use the O-Ring cutting fixture to achieve a straight cut at both ends.
Apply a small drop of LOCTITE 404 to one end of the O-Ring.
Immediately join the two ends using the V-groove on the end of the curing fixture. Hold in place for 30 seconds and then O-Ring is ready for service.
FAQ
3 foot lengths of 3/32 in, 1/8 in, 3/16 in and 1/4 in diameters.
The cord is Buna N.
The fixture has holes of the following diameter: 1/16 in, 3/32 in 1/8 in, 3/16 in, 1/4 in, 5/16 in, 3/8 in.
-
{{#data}}
{{#distributor.isVisible}}
{{#distributor.isExpanded}}
-
{{^distributor.unique}}
{{/distributor.unique}}