Mold release agents
Water-based mold-release emulsion for rubber-to-metal parts
A 1-part, fast and easy-to-apply water-based mold-release emulsion that releases standard rubbers and rubber-to-metal parts with low slip and low mold build-up.
All marks used are trademarks and/or registered trademarks of Henkel and its affiliates in the US, Germany, and elsewhere.
- Description
- Technical specification
- Ratings & reviews
- Question & answer
LOCTITE® FREKOTE® R-150 is a water-based mold-release emulsion that releases standard rubbers and rubber-to-metal parts. It provides low slip and low mold build-up, a matt finish, and is fast and easy to apply with a spray gun. It is heat-cured: multiple coats are applied to the heated mold, with no dry time needed between coats. Final coat dry time can be as short as 4 minutes.
-
Suitable for all standard rubbers
-
Low slip, low mold build-up
-
Fast and easy to apply
-
For rubber-to-metal parts
-
Fast cure time
- Product category:
- Mold release agents
Technologies:
-
Specialties, primers and coatings
- Finish reflection:
- Matte
- Full cure time, @ 150.0 °C:
- 4.0 min.
- Key characteristics:
- Release: rubber release,Water based
