Part no. (SKU/IDH):
1690727
IDH Name:
LOCTITE® AA 330, 25 ml Aerosol Can
Structural adhesives
Multipurpose, multi-substrate structural bonder
This no-mix, acrylic adhesive is ideal for metal-to-metal bonding as well as bonding dissimilar substrates like PVC, phenolic and acrylic compounds.
Marketing materials
Part no. (SKU/IDH):
1690727
IDH Name:
LOCTITE® AA 330, 25 ml Aerosol Can
All marks used are trademarks and/or registered trademarks of Henkel and its affiliates in the US, Germany, and elsewhere.
-
{{#data}}
{{#distributor.isVisible}}
{{#distributor.isExpanded}}
-
{{^distributor.unique}}
{{/distributor.unique}}
{{#distributor.onShelf}} {{#distributor.withSpecialPrice}} {{distributor.prices.specialWithSymbol}}
{{distributor.prices.regularWithSymbol}}
{{#distributor.withoutSpecialPrice}} {{distributor.prices.regularWithSymbol}}
{{#distributor.anyInStock}} {{/distributor.anyInStock}}In stock {{#distributor.notInStock}} {{/distributor.notInStock}}Out of stock {{#distributor.notOnShelf}} {{^distributor.notInStock}} {{#distributor.onShelf}} All available stock is already in cartYou have reached the maximum order quantity availableFor industrial use only. Not intended for consumer sale or use.
Large volume or special order?
{{#distributor.notOnShelf}} {{/distributor.notInStock}}{{#distributor.notInStock}} {{#distributor.onShelf}} {{#distributor.notInStock}} {{/distributor.onShelf}}There was a problem with your request. Please try again or contact us directly.
- Description
- Technical specification
- Question & answer
LOCTITE® AA 330 is a 2-step, acrylic-based multipurpose structural bonder, perfect for dissimilar substrates like PVC, phenolic and acrylic compounds. Applications include tool handles, appliances, sporting goods and decorative trims. It is a medium to high viscosity product with good impact resistance and a service temperature up to 100°C (212°F). It requires LOCTITE® SF 7387 to activate.
-
Multipurpose, multi-substrate structural bonder
-
Good impact resistance
-
Bonds dissimilar substrates
-
Activator required for cure
- Product category:
- Structural adhesives
Technologies:
-
Non-methyl methacrylate (MMA) structural adhesives
- Agency approvals / certificates / specifications:
- NSF P1
- Applications:
- Structural bonding
- Color:
- Yellow
- Cure type:
- Activator cure
- FEA (finite element analysis):
- Finite strain; Viscoelastic
- Fixture time:
- 3.0 min
- Key characteristics:
- Mix: no mix required
- Number of components:
- 1 part
- Viscosity, Brookfield - RVT, @ 25.0 °C:
- 45000.0 mPa·s (cP) - 90000.0 mPa·s (cP)
How to use
For best performance, bond surfaces should be clean and free from contaminants, including grease.
To ensure a fast and reliable cure, Activator 7387 or 7386 should be applied to one of the bond surfaces and the adhesive to the other surface. Parts should be assembled within 15 minutes. The recommended bondline gap is 0.1 mm. Where bond gaps are large (up to a maximum of 0.5 mm), or faster cure speed is required, Activator 7387 or 7386 should be applied to both surfaces. Parts should be assembled immediately (within 1 minute). Excess adhesive can be wiped away with organic solvent. Bond should be held clamped until adhesive has fixtured. Product should be allowed to develop full strength before subjecting to any service loads (typically 24 to 72 hours after assembly, depending on bond gap, materials and ambient conditions).
FAQ
Yes, For best performance, bond surfaces should be clean and free from contaminants. Cleaning parts prior to bonding should involve residue-free cleaners.
LOCTITE® AA 330 should be stored in the unopened container in a dry location, with storage information possibly indicated on the product container labeling. Its optimal storage temperature is 8°C to 21°C, and storage below 8°C or above 28°C can adversely affect product properties. Material removed from containers may be contaminated during use.
defined as the time required for the adhesive/activator combination to develop sufficient
strength in a 0.5" by 1.0" (13 mm by 25 mm) bond between two steel lap shears to support a 6.6 lb. (3 kg) weight (13.2 psi) for 10 seconds, is 3 minutes.
The tensile strength of this product is 12-22 N/mm² on grit-blasted mild steel, measured in the cured material state using the ISO 6922 test method.
LOCTITE® AA 330is recommended for appliances, decorative trim, NEV (New Energy Vehicle), sporting goods, and tool handles.
-
{{#data}}
{{#distributor.isVisible}}
{{#distributor.isExpanded}}
-
{{^distributor.unique}}
{{/distributor.unique}}
{{#distributor.onShelf}} {{#distributor.withSpecialPrice}} {{distributor.prices.specialWithSymbol}}
{{distributor.prices.regularWithSymbol}}
{{#distributor.withoutSpecialPrice}} {{distributor.prices.regularWithSymbol}}
{{#distributor.anyInStock}} {{/distributor.anyInStock}}In stock {{#distributor.notInStock}} {{/distributor.notInStock}}Out of stock {{#distributor.notOnShelf}} {{^distributor.notInStock}} {{#distributor.onShelf}} All available stock is already in cartYou have reached the maximum order quantity availableFor industrial use only. Not intended for consumer sale or use.
Large volume or special order?
{{#distributor.notOnShelf}} {{/distributor.notInStock}}{{#distributor.notInStock}} {{#distributor.onShelf}} {{#distributor.notInStock}} {{/distributor.onShelf}}There was a problem with your request. Please try again or contact us directly.
Our experts are here to learn more about your needs.
Our support center and experts are ready to help you find solutions for your business needs.