Skip to Content
Henkel Adhesive Technologies

Henkel Adhesive Technologies

Hybrid adhesives

A hybrid is a combination of two adhesive chemistries. For example, LOCTITE® 4070 is cyanoacrylate/methacrylate hybrid.

LOCTITE HY 4070 cannot be dispensed using automatic equipment. It is designed for dispensing directly from the ready-to-use pack for smaller applications, such as repairs.

Yes, LOCTITE HY 4080/4080GY/4090 can be dispensed using the following equipment:

MM10 50 ml Dual Cartridge Dispenser, Pressure/ Time system: The maximum cycle time is limited by mixing tip's life and in addition drop size versus cycle time must be carefully evaluated to ensure acceptable stability of dispensed amount. MM25 Dual Volumetric Rotor Pump Volumetric System: The length and diameter of the feed line must be considered due to the viscosity of the B component.

Yes, hybrids are two-part products so you need to ensure that both sides are flowing properly!

Not recommended.

Hybrid adhesives do not require refrigeration. You may refrigerate before you open them, but they should not be returned to the refrigerator once opened.

εικονίδιο εγγραφής
Εγγραφείτε για εύκολη πρόσβαση στους πόρους των ειδικών μας

Εγγραφείτε και αποθηκεύστε τα στοιχεία σας μία φορά για να έχετε πρόσβαση σε όλες τις ιδέες μας ανά πάσα στιγμή.

Looking for support options?

Our support center and experts are ready to help you find solutions for your business needs.

A lady with a headset.