Part no. (SKU/IDH):
2951262
IDH Name:
LOCTITE® PC 7332 Nordbak Wear Prevention Coating, 10 kg Hobbok / pail
Wear resistant coatings
High-performance, wet and dry abrasion-resistant coating
A 2-part epoxy resin, designed to protect, rebuild and repair manufacturing equipment subject to severe erosion and abrasion.
Part no. (SKU/IDH):
2951262
IDH Name:
LOCTITE® PC 7332 Nordbak Wear Prevention Coating, 10 kg Hobbok / pail
All marks used are trademarks and/or registered trademarks of Henkel and its affiliates in the US, Germany, and elsewhere.
-
{{#data}}
{{#distributor.isVisible}}
{{#distributor.isExpanded}}
- {{^distributor.unique}} {{/distributor.unique}} {{/distributor.isExpanded}} {{^distributor.isExpanded}} {{/distributor.isExpanded}} {{/distributor.isVisible}} {{/data}}
- Description
- Technical specification
LOCTITE® PC 7332 Nordbak Wear Prevention Coating is a high-performance, wet and dry abrasion-resistant epoxy resin system. It is designed to protect, rebuild and repair high -wear areas of manufacturing equipment, such as desulphurization pumps and ducts, slurry pumps and pipes, and slag granulation pumps, which are subject to severe wet-abrasion. It can also be used for particle abrasion under dry conditions in conduit elbows, chutes and other equipment. It is trowelable, non-sagging and requires no additional tooling.
-
Best-in-class resistance to wet and dry fine-particle abrasion
-
Tolerant to manually abraded and wet surfaces
-
Easy to mix and apply; trowelable and non-sagging
-
Good dry and wet temperature resistance
-
Functional cure in 6 hours
- Product category:
- Wear resistant coatings
Technologies:
-
Thermosets, 2K general epoxy
- Application method:
- Trowel
- Applications:
- Protective coating
- Color:
- Gray
- Cure type:
- Room temperature (ambient) cure; Two component mix
- Key characteristics:
- Chemical resistant; Erosion resistance: High; Sag: non-sag
- Mix ratio, by volume:
- 4:1
- Mix ratio, by weight:
- 4:1
- Operating temperature:
- < 120.0 °C (< 248.0 °F)
- Physical form:
- Paste
- Recommended for use with:
- Metal
- Shore hardness:
- 85.0
- Work life:
- 30.0 min.
-
{{#data}}
{{#distributor.isVisible}}
{{#distributor.isExpanded}}
- {{^distributor.unique}} {{/distributor.unique}} {{/distributor.isExpanded}} {{^distributor.isExpanded}} {{/distributor.isExpanded}} {{/distributor.isVisible}} {{/data}}
