Dispense systems
Precision light-cure acrylic adhesive dispenser
This high precision, positive displacement, volumetric metering valve is for dispensing drops of light cure acrylics. For accurate, reliable, repeatable drop applications.
All marks used are trademarks and/or registered trademarks of Henkel and its affiliates in the US, Germany, and elsewhere.
- Description
- Technical specification
LOCTITE® VA20 Volumetric Dispense Valve dispenses a precise drop of light cure acrylic adhesive with each cycle. Positive displacement minimizes dose size variation due to adhesive viscosity variations, as well as variations due to temperature changes and adhesive manufacturing variability. Included in the box: (1) VA20 Volumetric Valve, (1) PTFE lined tubing, 6.4 mm (0.25") OD, 2 m (6 ft) long, (1) air line 4 mm (0.16") OD, blue, 2 m (6 ft), (1) air line, 4 mm (0.16") OD, yellow, 2 m (6 ft), (1) needle sample kit, (1) operating manual.
-
Volumetric displacement dosing range: 1.5 to 12 microliters
-
Cycle rate: 180 cycles per min
-
Estimated life >1 million cycles
-
Designed for simple, no-mess priming: does not lose prime during operation
-
Compact size
- Product category:
- High precision dispense valves
Technologies:
-
Specialties, equipment
- Air input pressure, Recommended:
- 60.0 psi - 100.0 psi
- Applications:
- Dispensing adhesives
- Key characteristics, Recommended:
- Stroke adjustment
- Used to dispense, Recommended:
- Light cure acrylics
- Viscosity, Recommended:
- 1.0 mPa·s - 10000.0 mPa·s
