Part no. (SKU/IDH):
2333708
IDH Name:
LOCTITE® VA40 Cyanoacrylate Volumetric Valve
Dispense systems
Precise dosing of instant adhesives with high repeatability
This high precision, positive displacement, volumetric metering valve is for dispensing cyanoacrylates (instant adhesive). For accurate, reliable, repeatable drop applications.
Part no. (SKU/IDH):
2333708
IDH Name:
LOCTITE® VA40 Cyanoacrylate Volumetric Valve
All marks used are trademarks and/or registered trademarks of Henkel and its affiliates in the US, Germany, and elsewhere.
-
{{#data}}
{{#distributor.isVisible}}
{{#distributor.isExpanded}}
- {{^distributor.unique}} {{/distributor.unique}} {{/distributor.isExpanded}} {{^distributor.isExpanded}} {{/distributor.isExpanded}} {{/distributor.isVisible}} {{/data}}
- Description
- Technical specification
LOCTITE® VA40 CA Volumetric Valve is designed to dispense drops of cyanoacrylate (1.5 to 6 microliters, at a maximum cycle rate of 120/minute). It includes a check valve design, which improves the speed and reliability of priming. An innovative displacement rod and sealing system mean you can rely on a long dispensing life before you need to think about rebuilding.
-
Precision, volumetric drop dispensing of LOCTITE cyanoacrylate (CA) adhesives
-
Long life seal design (> 1 million cycles) minimizes maintenance requirements
-
Quick and reliable priming
-
Easily fed from a syringe or pressure reservoir
-
Included in the box: (1) VA40 CA Dispense Valve, (1) PTFE lined tubing, 6.4mm (0.25") OD, 2 m (6 ft) long, (1) air line, 4mm (0.16") OD, blue, 2 m (6 ft), (1) air line, 4mm (0.16") OD, yellow, 2 m (6 ft), (1) needle sample kit, (1) operating manual.
- Product category:
- High precision dispense valves
Technologies:
-
Specialties, equipment
- Air input pressure:
- 60.0 psi - 100.0 psi
- Applications:
- Dispensing adhesives
- Dispense patterns:
- Dots; Drops
- Fluid pressure, Recommended:
- 30.0 psi - 70.0 psi
- Key characteristics:
- Stroke adjustment
- Operating type:
- High precision; Positive displacement; Volumetric
- Used to dispense:
- Cyanoacrylates; Light cure acrylics
- Viscosity:
- 1.0 mPa·s - 10000.0 mPa·s
-
{{#data}}
{{#distributor.isVisible}}
{{#distributor.isExpanded}}
- {{^distributor.unique}} {{/distributor.unique}} {{/distributor.isExpanded}} {{^distributor.isExpanded}} {{/distributor.isExpanded}} {{/distributor.isVisible}} {{/data}}
