Structural adhesives
High-strength, thixotropic structural bonder for magnets
A 2-part, high-strength, thixotropic structural adhesive for SPM and IPM bonding.
All marks used are trademarks and/or registered trademarks of Henkel and its affiliates in the US, Germany, and elsewhere.
- Description
- Technical specification
LOCTITE® EA 3425 is a white to yellow (after mixing) epoxy structural adhesive system that offers high impact and high humidity resistance and a very high shear strength of 27 N/mm². Its thixotropic nature makes it easy to apply and reduces liquid migration after application, ideal for gap-filling (up to 3 mm) and use on vertical surfaces. It’s typically used for surface permanent magnet (SPM) and interior permanent magnet (IPM) bonding where a high production cycle is required. LOCTITE EA 3425 cures at room temperature when exposed to RT, heat or induction and provides high modulus and good chemical resistance.
-
High strength
-
Non-sag
-
Resistant to impact, humidity and chemicals
-
Temperature resistant up to 120°C (248°F)
- Product category:
- Structural adhesives
Technologies:
-
Thermosets, 2K general epoxy
- Fixture time:
- 240.0 min.
- Hardener: Color:
- Beige
- Hardener: Specific gravity, @ 25.0 °C:
- 1.37 - 1.45
- Hardener: Viscosity, Brookfield - RVT, @ 25.0 °C:
- 100000.0 mPa·s (cP) - 300000.0 mPa·s (cP)
- Mix ratio, by volume:
- 1 : 1
- Mixed: Color:
- White,Yellow
- Resin: Color:
- Beige
- Resin: Specific gravity, @ 25.0 °C:
- 1.34 - 1.4
- Resin: Viscosity, Brookfield - RVT, @ 25.0 °C:
- 1500000.0 mPa·s (cP) - 3500000.0 mPa·s (cP)
