Mold release agents
Multipurpose mold-release agent for epoxy and polyester gel coat applications
A 1-part, clear, solvent-based, multipurpose mold-release agent for epoxy and polyester gel coat applications.
All marks used are trademarks and/or registered trademarks of Henkel and its affiliates in the US, Germany, and elsewhere.
- Description
- Technical specification
LOCTITE® FREKOTE® 700NC is a clear, solvent based, moisture-curing release agent for epoxy and polyester gel coat advanced composites. It's typically used for releasing epoxies, polyester resins, thermoplastics, and most other molded polymers. It’s a versatile agent with high thermal stability, offering high slip where mold geometry problems are encountered. It is applied to mold surfaces from room temperature up to 135°C (275°F) by spraying, brushing or wiping, cures rapidly at room temperature and leaves a high-gloss finish.
-
Contains no chlorinated solvents
-
Leaves a high-gloss finish
-
Provides high slip
-
Suitable for advanced composites
- Product category:
- Mold release agents
Technologies:
-
Specialties, primers and coatings
- Drying time between coats, @ 20.0 °C:
- 5.0 min.
- Finish reflection:
- Gloss
- Full cure time, @ 20.0 °C:
- 20.0 min.
- Key characteristics:
- Solvent based
- Recommended for use with:
- Composite: advanced composites
