Part no. (SKU/IDH):
2237457
IDH Name:
LOCTITE® HY 4070, 11 g Twin (Dual) Cartridge
Structural adhesives
General purpose, high-performance bonder for a wide range of substrates
A 2-part, fast-fixturing adhesive with excellent moisture and temperature resistance.
-
LOCTITE® HY 4070, 11 g Twin (Dual) Cartridge en_GLIDH: 2237457
-
LOCTITE® HY 4070, 11 g Twin (Dual) Cartridge en_GLLOCTITE HY 4070 B (2217628)IDH: 2237457
-
LOCTITE® HY 4070, 11 g Twin (Dual) Cartridge en_GLLOCTITE HY 4070 A (2217629)IDH: 2237457
-
LOCTITE® HY 4070, 11 g Twin (Dual) Cartridge en_GLLOCTITE HY 4070 A (2232042)IDH: 2237457
-
LOCTITE® HY 4070, 11 g Twin (Dual) Cartridge en_GLLOCTITE HY 4070 PTB (2648413)IDH: 2237457
-
LOCTITE® HY 4070, 11 g Twin (Dual) Cartridge en_GLLOCTITE HY 4070 B (2217628)IDH: 2237457
-
LOCTITE® HY 4070, 11 g Twin (Dual) Cartridge en_GLLOCTITE HY 4070 A (2232042)IDH: 2237457
-
LOCTITE® HY 4070, 11 g Twin (Dual) Cartridge en_GLLOCTITE HY 4070 A (2217629)IDH: 2237457
-
LOCTITE® HY 4070, 11 g Twin (Dual) Cartridge en_GLLOCTITE HY 4070 PTB (2648413)IDH: 2237457
-
LOCTITE® HY 4070, 11 g Twin (Dual) Cartridge en_GLIDH: 2237457
Part no. (SKU/IDH):
2237457
IDH Name:
LOCTITE® HY 4070, 11 g Twin (Dual) Cartridge
All marks used are trademarks and/or registered trademarks of Henkel and its affiliates in the US, Germany, and elsewhere.
-
{{#data}}
{{#distributor.isVisible}}
{{#distributor.isExpanded}}
- {{^distributor.unique}} {{/distributor.unique}} {{/distributor.isExpanded}} {{^distributor.isExpanded}} {{/distributor.isExpanded}} {{/distributor.isVisible}} {{/data}}
- Description
- Technical specification
LOCTITE® HY 4070 Universal Bonder is a 2-part, fast-fixturing, cyanoacrylate/acrylic-hybrid adhesive that performs brilliantly on various substrates, including most plastics, rubbers and metals. It’s designed for the assembly of parts with bond gaps of up to 5 mm (0.2") and for applications where the complete cure of excess adhesive is a must. It has a gel consistency, which prevents adhesive flow even on vertical surfaces. Ideal for applications where temperature and moisture resistance are required. Best application results are achieved with use of the LOCTITE® cyanoacrylate mixing nozzle.
-
Fast fixturing
-
Moisture resistant
-
Temperature resistance: -40°C to 100°C (-40 to 212°F)
-
Gap filling up to 5 mm (0.2")
-
Gel consistency suitable for overhead applications
- Product category:
- Structural adhesives
Technologies:
-
Specialities, others
-
Cyanoacrylate
-
Acrylates, anaerobic cure
- Application method:
- Dispense system
- Applications:
- Bonding dissimilar materials; Bonding plastic; Bonding rubber; Construction; Direct bonding; Edge bonding; Interior repairs; Structural bonding
- Cure type:
- Room temperature (ambient) cure; Two component mix
- FEA (finite element analysis):
- Finite strain; Viscoelastic
- Fixture time, Aluminium (etched), 0.5mm gap:
- < 60.0 sec.
- Gap fill:
- 5.0 mm
- Hardener: Colour:
- Clear
- Hardener: Viscosity, cone & plate, @ 25.0 °C:
- 1.0 mPa·s (cP) - 30.0 mPa·s (cP)
- Mix ratio, by volume:
- 10 : 1
- Mixed: Key characteristics:
- Cure speed: ultra fast cure; Gap filling; Moisture resistant; Multipurpose
- Mixed: Operating temperature:
- -40.0 °C - 100.0 °C (-40.0 °F - 212.0 °F)
- Number of components:
- 2 part
- Physical form:
- Gel
- Recommended for use with:
- Composite; Composite: advanced composites; Dry surface; Elastomer: highly filled elastomer; Epoxy; Fiberboard; Gel coat; Laminate; Metal; Non-gel coat; Painted surface; Phenolic; Plastic; Rubber; Thermoplastic; Thermoset; Urethane: cast urethane; Vinyl; Wood
- Resin: Casson viscosity, cone & plate, @ 25.0 °C:
- 200.0 mPa·s (cP) - 1300.0 mPa·s (cP)
- Resin: Colour:
- Yellow
- Shear strength, Steel (grit blasted):
- 25.0 N/mm² (3625.0 psi)
FAQ
Henkel has a number of products available with varying levels of NSF® and WRAS® approval, amongst others. Please contact the Henkel sales or technical teams with your requirements.
All adhesives are compatible with metal substrates although bond strength and durability will vary depending on the technology selected. Anaerobic adhesives may cause stress-cracking in some sensitive polymers and therefore should generally be avoided on plastic parts. Consult Henkel technical teams for further advice as needed.
All necessary H&S measures and PPE (personal protection equipment) requirements can be found on the product material safety data sheet, all of which are available via our website.
-
{{#data}}
{{#distributor.isVisible}}
{{#distributor.isExpanded}}
- {{^distributor.unique}} {{/distributor.unique}} {{/distributor.isExpanded}} {{^distributor.isExpanded}} {{/distributor.isExpanded}} {{/distributor.isVisible}} {{/data}}
