Part no. (SKU/IDH):
1960969
IDH Name:
LOCTITE® 2400, 5 ml Blister card
Threadlockers
Blue, medium-strength, non-hazardous threadlocker
This white label, medium-strength threadlocking adhesive is suitable for all metal-threaded assemblies.
Marketing materials
Part no. (SKU/IDH):
1960969
IDH Name:
LOCTITE® 2400, 5 ml Blister card
Size Please make your selection 5 ml
Packaging type Please make your selection Blister card
All marks used are trademarks and/or registered trademarks of Henkel and its affiliates in the US, Germany, and elsewhere.
-
{{#data}}
{{#distributor.isVisible}}
{{#distributor.isExpanded}}
- {{^distributor.unique}} {{/distributor.unique}} {{/distributor.isExpanded}} {{^distributor.isExpanded}} {{/distributor.isExpanded}} {{/distributor.isVisible}} {{/data}}
- Description
- Technical specification
LOCTITE® 2400 is a medium-strength threadlocker formulated to secure and seal bolts, nuts and studs to prevent loosening due to vibration. It works on all metals and passive substrates. Slight contamination by industrial oils, corrosion prevention oils and cutting fluids is tolerated. LOCTITE 2400 carries no hazard symbols, risk or safety phrases and does not contain any declarable carcinogens, mutagens or reproductive toxins.
-
No hazard symbols, risks or safety phrases
-
WRAS Approval (BS6920)
-
Thread size = M36
-
Improved cure speed on inactive substrates
-
Thixotropic for ease of application
- Product category:
- Threadlockers
Technologies:
-
Acrylates, anaerobic cure
- Agency approvals / certificates / specifications:
- WRAS (BS-6920): 1104507
- Breakaway torque, M10 Black Oxide Bolts:
- 20.0 N·m (180.0 in./lb.)
- Casson viscosity, cone & plate:
- 350.0 mPa·s
- Colour:
- Blue
- Fixture time:
- 10.0 min.
- Key characteristics:
- General purpose; Strength: medium strength; Thixotropic
- Mixed: Applications:
- Threadlocking
- Mixed: Key characteristics:
- Mix: no mix required
- Prevail torque, M10 Black Oxide Bolts:
- 2.0 N·m (20.0 in./lb.)
- Recommended for use with:
- Metal: aluminium; Metal: brass; Metal: steel; Metal: steel - stainless steel
FAQ
No, our range of H&S anaerobic threadlockers offer comparable performance on many substrates. Our reformulated LOCTITE® 2400 and LOCTITE® 2700 have been optimised to offer exceptional speed and performance on new generation coatings, such as zinc flake (Gemomet®).
No, our range of H&S anaerobic threadlockers are of the same technology type. They become highly resistant thermoset polymers and offer corrosion protection, once cured. Please see relevant technical data sheet for details.
Think of these as variants of the well-known LOCTITE® 243 medium strength for LOCTITE® 2400, and LOCTITE® 270 high strength for LOCTITE® 2700 products. Please see relevant technical data sheets or speak with a Henkel representative to discuss.
Yes, you can use LOCTITE® 2400 and LOCTITE® 2700 for the same applications as LOCTITE® 243 and LOCTITE® 270. They also carry potable water approval (WRAS).
Yes, whilst these are ‘white label’ materials with no hazard warnings on the bottles or relevant material safety data sheet, it is best practice to wear protective gloves and glasses when using any adhesives, tools or machinery.
-
{{#data}}
{{#distributor.isVisible}}
{{#distributor.isExpanded}}
- {{^distributor.unique}} {{/distributor.unique}} {{/distributor.isExpanded}} {{^distributor.isExpanded}} {{/distributor.isExpanded}} {{/distributor.isVisible}} {{/data}}
