Part no. (SKU/IDH):
3039047
IDH Name:
LOCTITE® SI EV 9910, 300 ml Standard cartridge
Gasketing sealants
1-component silicone sealant for EV battery repair.
1-component silicone sealant offering a long open time, fast curing, and exceptional adhesion to a wide range of substrates for sealing EV battery packs.
Part no. (SKU/IDH):
3039047
IDH Name:
LOCTITE® SI EV 9910, 300 ml Standard cartridge
All marks used are trademarks and/or registered trademarks of Henkel and its affiliates in the US, Germany, and elsewhere.
-
{{#data}}
{{#distributor.isVisible}}
{{#distributor.isExpanded}}
- {{^distributor.unique}} {{/distributor.unique}} {{/distributor.isExpanded}} {{^distributor.isExpanded}} {{/distributor.isExpanded}} {{/distributor.isVisible}} {{/data}}
- Description
- Technical specification
LOCTITE® SI EV 9910 is a versatile, 1-component silicone sealant designed for high-performance applications. It offers an extended processing time and rapid curing. With excellent adhesion to various substrates and superior sealing properties, it is an ideal replacement for pre-cut gaskets and is perfect for sealing EV battery packs.
-
Superior adhesion to a wide range of substrates and protection against dust and moisture.
-
Rapid curing for quick turnaround times.
-
Extended processing time for precise application and adjustments.
- Product category:
- Gasketing sealants
Technologies:
-
Silicones, alkoxy
How to use
Cut off the upper part of the thread, then fit the application nozzle. Adjust the shape of the nozzle or trim it to achieve the best result for your specific application.
Place the cartridge in the TEROSON® POWERLINE II Air Cartridge Dispenser or a similar application tool.
Dispense and discard the first 2 cm of sealant to ensure a clean application.
Apply LOCTITE® SI EV 9910 directly to the battery flange, preferably in a continuous pass.
Carefully place the battery cover on the battery housing, ensuring that the sealant is well pressed into place.
Note: The cover must be installed within the 25-minute processing time.
Insert the fasteners into their designated holes and evenly tighten to ensure uniform pressure. Make sure the sealant is evenly distributed, with no visible gaps in the sealant around the edges of the battery housing.
Wait at least 30 minutes, then carry out an airtightness test with special testing equipment to meet the initial IP 67 requirements.
FAQ
LOCTITE® SI EV 9910 is a reliable and durable seal that offers excellent adhesion to a variety of substrates. It provides strong resistance to water, chemicals, and is stable against vibrations or mechanical shocks, making it highly effective in protecting battery packs from water and dust. For more technical information, please contact us. [link to contact page]
The substrates to which this product is applied, such as the battery tray or lid, should be dry and free from dust, grease, and other contaminants. For optimal adhesion, we recommend using our professional cleaner, TEROSON® VR 10 [link to VR10], to thoroughly clean the surfaces. LOCTITE® SI EV 9910 offers excellent adhesion to various substrates, including steel, aluminum, and composites such as SMC. For more detailed information, please refer to the TDS [link to TDS].
LOCTITE® SI EV 9910 is a moisture-curing product that provides excellent adhesion to a wide variety of substrates, without the need for a primer or activator. Wait at least 30 minutes before performing an airtightness test with specialized equipment to meet water and dust protection standards, such as IP55, IP65, and IP67. For more technical information, please contact us. [link to contact page]
-
{{#data}}
{{#distributor.isVisible}}
{{#distributor.isExpanded}}
- {{^distributor.unique}} {{/distributor.unique}} {{/distributor.isExpanded}} {{^distributor.isExpanded}} {{/distributor.isExpanded}} {{/distributor.isVisible}} {{/data}}
