Part no. (SKU/IDH):
3042904
IDH Name:
LOCTITE® RB EV 9740, 1 single roll Sack
Gasketing sealants
Butyl rubber cord for sealing EV battery packs.
1-component, self-adhesive butyl rubber cord designed for the rapid and reliable sealing of EV battery packs, requiring no additional application equipment.
Part no. (SKU/IDH):
3042904
IDH Name:
LOCTITE® RB EV 9740, 1 single roll Sack
All marks used are trademarks and/or registered trademarks of Henkel and its affiliates in the US, Germany, and elsewhere.
-
{{#data}}
{{#distributor.isVisible}}
{{#distributor.isExpanded}}
- {{^distributor.unique}} {{/distributor.unique}} {{/distributor.isExpanded}} {{^distributor.isExpanded}} {{/distributor.isExpanded}} {{/distributor.isVisible}} {{/data}}
- Description
- Technical specification
LOCTITE® RB EV 9740 is a 1-component, self-adhesive butyl rubber cord designed for the rapid and reliable sealing of EV battery packs. This versatile solution requires no additional application equipment and provides immediate sealing performance with no curing time needed. Its unique, non-corrosive adhesive properties ensure permanent tackiness and self-welding capabilities, delivering a durable, water-resistant seal that performs reliably in demanding environments.
-
Permanent tackiness and self-welding for a lasting, secure seal.
-
Durable, water-resistant seal for reliable performance in tough environments.
-
Instant seal, no curing time – fast and reliable results.
-
Effortless application, no extra tools required.
-
Perfectly sized to seal one battery pack, with no leftovers.
- Product category:
- Gasketing sealants
Technologies:
-
Rubber and plastisols, preformed parts
How to use
Position the LOCTITE® RB EV 9740 cord on the flange of the battery tray, ensuring the release paper is on the upper side, and gently press down. The adhesive properties of the cord will hold it in place. Continue pressing the cord onto the flange, ensuring complete coverage of the sealing area. At the endpoint, overlap the cord by at least 2 cm.
Check that the cord is properly pressed on, and then carefully remove the release paper.
Carefully place the battery cover on the battery housing, ensuring that the sealant is well pressed in place.
Insert the fasteners into their designated holes and evenly tighten to ensure uniform pressure. Make sure the cord remains in its designated position.
Carry out an airtightness test with special testing equipment to meet the initial IP 67 requirements. You can do this directly after assembly of the cover.
FAQ
LOCTITE® RB EV 9740 delivers a strong, reliable seal with exceptional adhesion to multiple substrates, making it ideal for battery repairs.For additional technical details, please reach out to us. [link to contact page]
For optimal adhesion, the substrates on the battery tray or lid should be clean, dry, and free from contaminants like dust, grease, or other adhesion inhibitors. We recommend using our professional cleaner, TEROSON® VR 10 [link to VR10], to ensure thorough cleaning of the surfaces. LOCTITE® RB EV 9740 provides excellent adhesion to various substrates, including steel, aluminum, and composites such as SMC. For more detailed information, please refer to the Technical Data Sheet (TDS) [link to TDS].
LOCTITE® RB EV 9740 does not require chemical curing. With this product, air leakage and ingress protection tests can be conducted immediately, providing a seal and protection right after the assembly of the EV battery pack. This significantly reduces working time and enhances workshop efficiency. For more details, please contact us. [link to contact page]
-
{{#data}}
{{#distributor.isVisible}}
{{#distributor.isExpanded}}
- {{^distributor.unique}} {{/distributor.unique}} {{/distributor.isExpanded}} {{^distributor.isExpanded}} {{/distributor.isExpanded}} {{/distributor.isVisible}} {{/data}}
