Part no. (SKU/IDH):
255770
IDH Name:
LOCTITE EA 3463 114G SE/FI
Metal rebuilding materials
Versatile, steel-filled, kneadable epoxy stick for emergency repairs
A 2-part, steel-filled epoxy repair putty that is easy-to-use and stops leaks in pipes and tanks, fills oversized bolt holes, smooths welds, and repairs non-structural defects in castings or holes in tanks.
Part no. (SKU/IDH):
255770
IDH Name:
LOCTITE EA 3463 114G SE/FI
All marks used are trademarks and/or registered trademarks of Henkel and its affiliates in the US, Germany, and elsewhere.
-
{{#data}}
{{#distributor.isVisible}}
{{#distributor.isExpanded}}
- {{^distributor.unique}} {{/distributor.unique}} {{/distributor.isExpanded}} {{^distributor.isExpanded}} {{/distributor.isExpanded}} {{/distributor.isVisible}} {{/data}}
- Description
- Technical specification
LOCTITE® EA 3463 is a versatile, easy-to-use, steel-filled epoxy kneadable stick. It is applied like a putty and, when cured, exhibits high compressive strength and great adhesion to most surfaces. It cures in 10 minutes, adheres to most damp surfaces and will even cure under water.
-
Steel-filled kneadable stick
-
For emergency repair of tanks, pipes and castings
-
Cures in 10 minutes
-
Cures on damp surfaces and under water
- Product category:
- Metal rebuilding materials
Technologies:
-
2K liquid
-
Thermosets, 2K general epoxy
- Application method:
- Manual
- Applications:
- Repairing
- Cure type:
- Room temperature (ambient) cure; Two component mix
- Fixture time:
- 10.0 min.
- Mixed: Color:
- Black
- Mixed: Key characteristics:
- Compressive strength: high; Cure speed: fast cure; Emergency repair; Kneadable; Underwater curing
- Physical form:
- Putty
- Recommended for use with:
- Metal
- Work life:
- 3.0 min.
How to use
It is recommended to use the correct LOCTITE® cleaner for the surface to be bonded (such as LOCTITE® SF 7063 or SF 7070) to degrease and clean surfaces prior to applying the adhesive.
Use gloves - do not mix with bare hands. Cut required amount of material from stick. Remove clear plastic wrapper from cut section. To mix, first twist the material to produce a spiral pattern of resin and hardener. Next, knead material for 2 to 3 minutes or until a uniform color is achieved.
Firmly apply for patch, repair or bonding. For a smooth finish, wet a cloth or gloved finger with water and smooth.
FAQ
This product can be applied to wet surfaces, but the bond strength will be lower.
-
{{#data}}
{{#distributor.isVisible}}
{{#distributor.isExpanded}}
- {{^distributor.unique}} {{/distributor.unique}} {{/distributor.isExpanded}} {{^distributor.isExpanded}} {{/distributor.isExpanded}} {{/distributor.isVisible}} {{/data}}
