Dispense systems
Pneumatically activated dispense valves for acrylics and anaerobics
These diaphragm valves, available with 2 mm (0.08") and 3 mm (0.12") orifices, are pneumatically activated dispense valves for use with acrylics and anaerobics.
All marks used are trademarks and/or registered trademarks of Henkel and its affiliates in the US, Germany, and elsewhere.
- Description
- Technical specification
LOCTITE® Diaphragm Valves are pneumatically activated dispense valves that utilize a floating PTFE diaphragm. The valves can be mounted or handheld in conjunction with pressure-time dispense systems. The valves are not suited for cyanoacrylate products. The 2 mm (0.08 oz) orifice diaphragm valve is used with low-viscosity anaerobics (up to 2,500 mPa·s). The 3 mm (0.12 oz) orifice diaphragm valve is used with low- to medium-viscosity anaerobic and thixotropic products (2,500 to 5,000 mPa·s). Included in the box: (1) Diaphragm Valve, (1) product feed line 6.5 mm (0.25"), (1) needle variety kit, (1) operating manual.
-
Cost-effective valves for use with pressure-time systems
-
Modular design and floating diaphragm allow for easy cleaning or repair
-
Fail-safe spring assists closing of valve upon loss of air pressure
-
Internal components are PTFE to prevent premature curing
-
Flow rates can be increased with use of 3/8 in feed line
- Product category:
- Diaphragm dispense valves
Technologies:
-
Specialties, equipment
- Applications:
- Dispensing adhesives
- Fluid pressure, Recommended:
- 7.0 psi - 58.0 psi
- Key characteristics, Recommended:
- Viscosity: low viscosity
- Used to dispense, Recommended:
- Light cure acrylics,Retaining compounds,Threadlockers
- Viscosity, Recommended:
- 0.0 mPa·s - 2500.0 mPa·s
