Part no. (SKU/IDH):
2052314
IDH Name:
LOCTITE® SI 5366, 50 ml Standard cartridge
Flexible sealants
Clear, flexible, general purpose silicone sealant/adhesive
A 1-part, industrial silicone sealant/adhesive with flexibility that offers enhanced load bearing and shock absorbing characteristics.
Part no. (SKU/IDH):
2052314
IDH Name:
LOCTITE® SI 5366, 50 ml Standard cartridge
Size Please make your selection 50 ml
Packaging type Please make your selection Standard Cartridge
All marks used are trademarks and/or registered trademarks of Henkel and its affiliates in the US, Germany, and elsewhere.
-
{{#data}}
{{#distributor.isVisible}}
{{#distributor.isExpanded}}
-
{{^distributor.unique}}
{{/distributor.unique}}
- Description
- Technical specification
LOCTITE® SI 5366 is a 1-part, clear industrial acetoxy silicone sealant/adhesive designed specifically to ensure perfect sealing as well as bonding and protection. Typical applications include sealing side windows in trains, sealing heat sources (ovens, heat exchangers, steam circuits, water heaters), providing protection/insulation of electrical boxes, bonding of HCR silicones and in general maintenance.
-
Specially formulated for perfect sealing
-
1-part: no mixing required
-
Rapid skin formation
-
Enhances load bearing & shock absorbing characteristics of bond area
- Product category:
- Flexible sealants
Technologies:
-
Silicones, acetoxy
- Color:
- Clear
- Elongation, at break, ISO 37:
- 530.0 %
- Shear strength, ISO 4587, Aluminum (grit blasted):
- 2.0 N/mm²
How to use
1. For best performance bond surfaces should be clean and free from grease.
2. Moisture curing begins immediately after the product is exposed to the atmosphere, therefore parts to be assembled should be mated within a few minutes after the product is dispensed. The bond should be allowed to cure (e.g. seven days), before subjecting it to heavy service loads.
3. When the joint is assembled, pressure should be applied to spread the adhesive out and fill the joint completely.
FAQ
Yes, for best performance bond surfaces should be clean and free from oil and grease. Clean using solvent-based cleaners such as LOCTITE® SF 7063 or BONDERITE® C-MC 90014 impregnated wipes.
LOCTITE® SI 5366 should be stored in the unopened container in a dry location. Storage information may be indicated on the product container labeling, with optimal Storage 8 °C to 21 °C. Storage below 8 °C or greater than 28 °C can adversely affect product properties. Material removed from containers may be contaminated during use.
The Tensile Strength of this product is 2.5 N/mm², measured under ISO 37, after curing for 7 days at 25°C and 50% relative humidity on a 0.5 mm thick film.
LOCTITE® SI 5366 is recommended for bonding and sealing, chassis, electrical boxes, heat exchangers, ovens, powertrain, sealing, steam circuits, train interior, and water heaters.
-
{{#data}}
{{#distributor.isVisible}}
{{#distributor.isExpanded}}
-
{{^distributor.unique}}
{{/distributor.unique}}
