Part no. (SKU/IDH):
374345
IDH Name:
FREKOTE SOLO 3,78L DEXTER
Mold release agents
Mold release agent for fiberglass-reinforced and filled polyester composites
This high-performance, solvent-based, moisture-cured mold release agent is designed for fiberglass-reinforced and filled polyester composites.
Part no. (SKU/IDH):
374345
IDH Name:
FREKOTE SOLO 3,78L DEXTER
Size Please make your selection 3.78 l
Packaging type Please make your selection
All marks used are trademarks and/or registered trademarks of Henkel and its affiliates in the US, Germany, and elsewhere.
-
{{#data}}
{{#distributor.isVisible}}
{{#distributor.isExpanded}}
-
{{^distributor.unique}}
{{/distributor.unique}}
- Description
- Technical specification
LOCTITE® FREKOTE® 1STEP is a clear, high-performance, solvent-based, moisture-cured mold release agent designed for fiberglass reinforced and filled polyester composites. Its ‘spray and leave’ technology, which requires no sealer, eliminates the need for polishing or mold sealing, offering a high-gloss gelcoat finish with minimal mold build-up. It is fast and easy to apply with a HVLP spray gun and requires no cure time required between coats.
-
Spray-and-leave technology
-
High gloss finish
-
Requires no mold sealer
-
For FRP polyester parts
-
Apply with HVLP spray gun
- Product category:
- Mold release agents
Technologies:
-
Specialties, primers and coatings
- Finish reflection:
- Gloss: high gloss
- Full cure time, @ 20.0 °C:
- 30.0 min
- Key characteristics:
- Solvent based
- Recommended for use with:
- Fiberglass reinforced plastic (FRP)
-
{{#data}}
{{#distributor.isVisible}}
{{#distributor.isExpanded}}
-
{{^distributor.unique}}
{{/distributor.unique}}
