Part no. (SKU/IDH):
2826828
IDH Name:
BONDERITE® C-MC 90014 WIPES, 60 wipes Can
Industrial cleaners for surface treatments
Pre-saturated cleaning wipes for industrial applications
These ready-to-use cleaning wipes are effective, environmentally friendly alternatives to traditional high-VOC solvent cleaners.
Part no. (SKU/IDH):
2826828
IDH Name:
BONDERITE® C-MC 90014 WIPES, 60 wipes Can
All marks used are trademarks and/or registered trademarks of Henkel and its affiliates in the US, Germany, and elsewhere.
-
{{#data}}
{{#distributor.isVisible}}
{{#distributor.isExpanded}}
-
{{^distributor.unique}}
{{/distributor.unique}}
- Description
- Technical specification
BONDERITE® C-MC 90014 WIPES are ready-to-use, pre-saturated cleaning wipes for industrial applications. They are applicable to all substrates, such as metals, plastics, glass, leather, tissues and ceramics, and dry fast without leaving noticeable residues. These wipes are an effective, environmentally friendly alternative to traditional high-VOC solvent cleaners, providing strong degreasing capabilities while minimizing health and environmental risks.
-
Low VOC content
-
Very strong and highly tear-resistant
-
Fast drying
-
Non-corrosive to metals and skin
-
Offers a long lifetime due to low evaporation
- Product category:
- Maintenance cleaners
Technologies:
-
Liquid, strong alkaline
How to use
1. Read the Material Safety Data Sheet and observe local safety instructions before use.
2. Use BONDERITE® C-MC 90014 WIPES as supplied at room temperature.
3. Apply the wipe vertically across the surface.
4. Apply the wipe horizontally across the surface to support full coverage.
5. Ensure that the surface is fully wet during application.
6. Let the treated surface dry at room temperature.
7. Accelerate drying with compressed air or a clean dry cloth if needed.
8. Handle treated parts with clean cotton gloves to avoid fingerprints.
FAQ
BONDERITE® C-MC 90014 WIPES are ready-to-use cloths soaked with a water-based, light alkaline cleaner for cleaning and degreasing metallic or plastic parts.
Yes. BONDERITE® C-MC 90014 WIPES can be used as a more sustainable alternative to high VOC cleaners such as acetone, heptane, toluene and MEK.
Yes. The TDS states that BONDERITE® C-MC 90014 WIPES are compatible with most substrates, including metals and plastics, but a pre-test is always recommended.
For general surface cleaning no rinsing is required. When used as a preparation for bonding or sealing, a rinse step may be recommended to achieve optimum performance. Adhesive/sealant compatibility should be checked with an Application Engineer.
The recommended storage temperature is 5°C to 40°C, and the shelf life is 36 months in unopened original packaging.
-
{{#data}}
{{#distributor.isVisible}}
{{#distributor.isExpanded}}
-
{{^distributor.unique}}
{{/distributor.unique}}
