${i18n.pdp.part-no}
194420
${i18n.pdp.idh-name}
LOCTITE® Vari-Drop Applicator with Tubing and Guards
Dispense systems
Low cost, manually controlled valve
This applicator, with its 6.3 mm (0.25") PTFE-lined feed line tubing and spring guards, is a low cost, manually controlled valve.
-
Industrial manufacturing
- Durable goods
${i18n.pdp.part-no}
194420
${i18n.pdp.idh-name}
LOCTITE® Vari-Drop Applicator with Tubing and Guards
- ${i18n.pdp.description}
- ${i18n.pdp.technical-specifications}
LOCTITE® Vari-Drop Applicator with 6.35 mm (0.25") PTFE-Lined Feed Line Tubing and Spring Guards allows repeatable dispense from drops to heavy beads. The quantity applied is dependent on the stroke set for the trigger and how long the operator holds down the trigger. The Vari-Drop handheld dispensing valve uses an effective pinch tube design, which can be exchanged out in a matter of minutes. Included in the box: (1) Vari-Drop Applicator, (1) needle kit, (1) 2.13 m (7 ft) x 6.3 mm (0.25") OD, PTFE-lined hose with hose guards, (1) operating manual.
-
Suitable for dispensing low- to medium-viscosity products
-
The adjusting screw allows repeatable dispense from drops to heavy beads
-
Accepts a variety of dispensing needles to apply precise amounts of product
-
Low cost
-
Designed with light-blocking materials for light curing adhesives
- ${i18n.pdp.product-category}
- Handheld dispense valves
${i18n.pdp.technologies}
-
Specialties, equipment
- Air input pressure, Recommended:
- 100.0 psi
- Applications:
- Dispensing adhesives
- Dispense patterns:
- Beads; Dots; Drops
- Fluid pressure, Recommended:
- 100.0 psi
- Key characteristics, Recommended:
- Stroke adjustment; Viscosity: low to medium viscosity
- Used to dispense, Recommended:
- Cyanoacrylates; Light cure acrylics; Retaining compounds; Threadlockers
- Viscosity, Recommended:
- 100.0 mPa·s - 80000.0 mPa·s