Part no. (SKU/IDH):
2040430
IDH Name:
LOCTITE® HM22 Manual Dispenser
Dispense systems
Ergonomically dispenses LOCTITE structural hot melt products
This manual dispenser is ergonomically designed to heat, melt, and dispense all 43 mm (1.69") diameter LOCTITE structural hot melt products.
Part no. (SKU/IDH):
2040430
IDH Name:
LOCTITE® HM22 Manual Dispenser
All marks used are trademarks and/or registered trademarks of Henkel and its affiliates in the US, Germany, and elsewhere.
-
{{#data}}
{{#distributor.isVisible}}
{{#distributor.isExpanded}}
-
{{^distributor.unique}}
{{/distributor.unique}}
- Description
- Technical specification
LOCTITE® HM22 Manual Dispenser is a handheld hot melt adhesive dispenser used for dispensing 43 mm (1.69") diameter Polyshot Sticks without pneumatic assistance. It is designed for high volume, high production industrial environments. The system includes a plug-in thermostat at 160°C (320°F) and 195°C (383°F) for EVA hot melts and a plug-in thermostat at 215°C (420°F) for polyamide hot melts. The dispense quantity and timing are manually controlled with the trigger mechanism. A dispenser stand is included as part of the system. Included in the box: (1) HM22 Manual Dispenser; (1) plastic stand; (1) plug-in temperature modules: 160°C (320°F), 195°C (383°F), 215°C (420°F); (1) operating manual.
-
Low actuation force to reduce finger fatigue
-
Electronic temperature control
-
3 plug-in fixed thermostat modules supplied
-
Dispenses up to 3.8 kg (8.25 lb) per hour
- Product category:
- Hot melt dispense systems
Technologies:
-
Specialties, equipment
- Applications:
- Dispensing adhesives
- Dispense melt rate, Recommended:
- 66.0 lb./h
- Used to dispense, Recommended:
- EVAs; Polyamides
-
{{#data}}
{{#distributor.isVisible}}
{{#distributor.isExpanded}}
-
{{^distributor.unique}}
{{/distributor.unique}}
