Part no. (SKU/IDH):
1046901
IDH Name:
LOCTITE® High Pressure Cartridge Dispenser (300ml)
Dispense systems
Benchtop dispenser for high-viscosity bonders and sealants
This high pressure benchtop cartridge dispenser is designed for high-viscosity, 1-part adhesives and sealants packaged in 300 ml (10 oz) cartridges.
Part no. (SKU/IDH):
1046901
IDH Name:
LOCTITE® High Pressure Cartridge Dispenser (300ml)
All marks used are trademarks and/or registered trademarks of Henkel and its affiliates in the US, Germany, and elsewhere.
-
{{#data}}
{{#distributor.isVisible}}
{{#distributor.isExpanded}}
-
{{^distributor.unique}}
{{/distributor.unique}}
- Description
- Technical specification
LOCTITE® High Pressure Benchtop Cartridge Dispenser extracts adhesive from the cartridge and delivers it to a high pressure dispense valve (sold separately) via a high pressure pump and 2 m (6 ft) feed line (both included), thus providing a completely integrated solution for dispensing drops or beads of high-viscosity adhesive. This dispenser can be used as a manual dispenser, or integrated with a controller and dispensing valve for automated dispensing. It can be used to dispense silicone, polyurethane and MS polymer adhesives. Not to be used for dispensing anaerobic products. Included in the box: (1) High Pressure Cartridge Dispenser, (2) cartridge adaptor inserts, (1) PTFE lined stainless steel braided feed line (2 m / 6 ft length), (1) power cord, (1) XS2 connection cable, (1) low level sensor with cable (1 m / 3 ft length) – already installed, (1) air supply line (2 m / 6 ft length), (1) lubricant oil, (1) instruction manual.
-
High-pressure capability up to 725 psi (50 bar)
-
Minimal pressure fluctuation for consistent product flow
-
Pump cycle rate: up to 200 cycles/minute (maximum)
-
Up to 3 m (10 ft) feed line length
-
Product viscosities of 10,000-1,000,000 mPa·s
-
Accepts LOCTITE 300 ml cartridges
-
Low level sensing capabilities
- Product category:
- Single cartridge dispense systems
Technologies:
-
Specialties, equipment
- Air input pressure, Recommended:
- 85.0 psi
- Applications:
- Dispensing adhesives
- Fluid pressure, Recommended:
- 0.0 psi - 725.0 psi
- Key characteristics, Recommended:
- Low level sensing
- Used to dispense, Recommended:
- MS polymers; Polyurethanes; Silicones
- Viscosity, Recommended:
- 10000.0 mPa·s - 1000000.0 mPa·s
-
{{#data}}
{{#distributor.isVisible}}
{{#distributor.isExpanded}}
-
{{^distributor.unique}}
{{/distributor.unique}}
