${i18n.pdp.part-no}
88642
${i18n.pdp.idh-name}
LOCTITE® Handheld Manual Applicator, Finger Switch
Dispense systems
For dispensing products up to 15,000 mPa·s viscosity
This applicator is specially designed for manual dispensing of 1-part products up to 15,000 mPa·s viscosity with reduced hand fatigue.
- Industrial manufacturing
${i18n.pdp.part-no}
88642
${i18n.pdp.idh-name}
LOCTITE® Handheld Manual Applicator, Finger Switch
- ${i18n.pdp.description}
- ${i18n.pdp.technical-specifications}
LOCTITE® Manual Handheld Applicator is a pressure time dispense valve actuated by a finger trigger, which is ergonomically designed for comfort, application control, and a low actuation force to reduce hand fatigue. It incorporates a suck-back feature, which prevents dripping or stringing. The valve can be used in conjunction with LOCTITE reservoirs as a substitute for LOCTITE® Vari-Drop Applicator. If dispensing an adhesive over 15,000 mPa·s, then a 10 cm (3.8") feed line upgrade kit is available that will allow dispensing products up to 80,000 mPa·s viscosity.
-
Included in the box: (1) Handheld Applicator, (1) applicator grip, (1) trigger lever, (1) needle kit, (1) operating manual.
- ${i18n.pdp.product-category}
- Handheld dispense valves
${i18n.pdp.technologies}
-
Specialties, equipment
- Air input pressure, Recommended:
- 60.0 psi - 60.0 psi
- Applications:
- Dispensing adhesives
- Fluid pressure, Recommended:
- 4.0 psi - 35.0 psi
- Key characteristics, Recommended:
- Stroke adjustment; Vacuum suck-back; Viscosity: low to medium viscosity
- Used to dispense, Recommended:
- Light cure acrylics; Retaining compounds; Threadlockers