?wid=1440&fmt=webp&qlt=60&fit=hfit%2C1)
Part no. (SKU/IDH):
88633
IDH Name:
LOCTITE® Digital Syringe System
Dispense systems
For electrical components and locking of fasteners
This syringe dispenser is used for the assembly of electrical components, wire tacking, circuit board repair, and the locking of fasteners.
Part no. (SKU/IDH):
88633
IDH Name:
LOCTITE® Digital Syringe System
All marks used are trademarks and/or registered trademarks of Henkel and its affiliates in the US, Germany, and elsewhere.
-
{{#data}}
{{#distributor.isVisible}}
{{#distributor.isExpanded}}
-
{{^distributor.unique}}
{{/distributor.unique}}
- Description
- Technical specification
LOCTITE® Digital Precision Syringe Dispenser accurately dispenses adhesives or other fluids with viscosities ranging from water-thin to paste-like consistencies for a variety of assembly and repair applications. This system is effective at delivering precise dots of adhesive in a timed mode or can be used on demand for beads or potting in a continuous mode. Included in the box: (1) Digital Syringe Dispensing System, (1) power cord, (1) foot switch, (1) operating manual.
-
Precision air pressure regulator for precise application of small dots
-
Vacuum suck-back feature to prevent dripping during idle time
-
Quick pressure setup feature
-
Process monitoring – air pressure sensor detects ± 10% variation from set pressure and alerts operator if detected
-
Digital timer display, for precise timer settings
- Product category:
- Syringe dispense systems
Technologies:
-
Specialties, equipment
- Air input pressure, Recommended:
- 0.0 psi - 30.0 psi
- Applications:
- Dispensing adhesives
- Fluid pressure, Recommended:
- 0.0 psi - 100.0 psi
- Key characteristics, Recommended:
- Vacuum suck-back; Viscosity: low to paste viscosity
- Used to dispense, Recommended:
- Adhesives-gel; Cyanoacrylates; Light cure acrylics; Retaining compounds; Threadlockers
-
{{#data}}
{{#distributor.isVisible}}
{{#distributor.isExpanded}}
-
{{^distributor.unique}}
{{/distributor.unique}}
