${i18n.pdp.part-no}
215846
${i18n.pdp.idh-name}
LOCTITE® Diaphragm Valve, 2.0 mm orifice
Dispense systems
Pneumatically activated dispense valves for acrylics and anaerobics
These diaphragm valves, available with 2 mm (0.08") and 3 mm (0.12") orifices, are pneumatically activated dispense valves for use with acrylics and anaerobics.
-
Industrial manufacturing
- Durable goods
${i18n.pdp.part-no}
215846
${i18n.pdp.idh-name}
LOCTITE® Diaphragm Valve, 2.0 mm orifice
Orifice ${i18n.pdp.make-selection} 2.0 mm
- ${i18n.pdp.description}
- ${i18n.pdp.technical-specifications}
LOCTITE® Diaphragm Valves are pneumatically activated dispense valves that utilize a floating PTFE diaphragm. The valves can be mounted or handheld in conjunction with pressure-time dispense systems. The valves are not suited for cyanoacrylate products. The 2 mm (0.08 oz) orifice diaphragm valve is used with low-viscosity anaerobics (up to 2,500 mPa·s). The 3 mm (0.12 oz) orifice diaphragm valve is used with low- to medium-viscosity anaerobic and thixotropic products (2,500 to 5,000 mPa·s).
-
Cost-effective valves for use with pressure-time systems
-
Modular design and floating diaphragm allow for easy cleaning or repair
-
Fail-safe spring assists closing of valve upon loss of air pressure
-
Internal components are PTFE to prevent premature curing
-
Flow rates can be increased with use of 3/8 in feed line
-
Included in the box: (1) Diaphragm Valve, (1) product feed line 6.5 mm (0.25"), (1) needle variety kit, (1) operating manual.
- ${i18n.pdp.product-category}
- Diaphragm dispense valves
${i18n.pdp.technologies}
-
Specialties, equipment
- Applications:
- Dispensing adhesives
- Fluid pressure, Recommended:
- 7.0 psi - 58.0 psi
- Key characteristics, Recommended:
- Viscosity: low viscosity
- Used to dispense, Recommended:
- Light cure acrylics; Retaining compounds; Threadlockers
- Viscosity, Recommended:
- 0.0 mPa·s - 2500.0 mPa·s