Part no. (SKU/IDH):
158531
IDH Name:
LOCTITE® 7415 UV Benchtop Conveyor
Light curing systems
High-quality UV-cure system which is well suited for most UV applications
LOCTITE ZETA 7415 Electrodeless UV Cure Conveyor is a high quality UV cure system, which is well-suited for most UV applications.
Part no. (SKU/IDH):
158531
IDH Name:
LOCTITE® 7415 UV Benchtop Conveyor
All marks used are trademarks and/or registered trademarks of Henkel and its affiliates in the US, Germany, and elsewhere.
-
{{#data}}
{{#distributor.isVisible}}
{{#distributor.isExpanded}}
-
{{^distributor.unique}}
{{/distributor.unique}}
- Description
- Technical specification
LOCTITE® ZETA® 7415 Electrodeless UV Conveyor is a benchtop conveyor is designed to accept a 152.4 mm (6") electrodeless H bulb lamp system (sold separately). The belt speed of the conveyor has two settings; the high speed setting ranges from 3.3 to 23 FPM and the low speed setting ranges from 0.3 to 7.2 FPM. Process development and testing along with small scale light curing production are typical applications. This conveyor is good for use in confined and exposed bondline applications.
-
Conveyor speed is variable ranging from 100.6 cm to 701.04 cm (3.3 ft to 23 ft) per minute or can be reconfigured to 9.14 cm to 219.46 cm (0.3 ft to 7.2 ft) per minute
-
Maximum part size: 190.5 mm width x 76.2 mm height (7 1/2” x 3”)
-
Lamp orientation and height are adjustable
-
High UV output with low IR output results in less heat to the substrate
-
The system is shipped standard with an H bulb, but will accept D or V bulbs to fine tune lamp spectral output
-
Integrated modular blower for lamp cooling
-
Typical curing area width of 152.4 mm (6")
- Product category:
- UV and visible light curing systems
Technologies:
-
Specialties, equipment
- Applications:
- Light curing
- Bulb type, Recommended:
- Focus H
-
{{#data}}
{{#distributor.isVisible}}
{{#distributor.isExpanded}}
-
{{^distributor.unique}}
{{/distributor.unique}}
