${i18n.pdp.part-no}
420494
${i18n.pdp.idh-name}
LOCTITE® 175 Spray Series Hot Melt Applicator, Hot Melt system - 175 spray HT
Dispense systems
Handheld pneumatic applicator for SprayPac sticks
These spray applicators are designed for dispensing 44.5 mm (1.75") diameter SprayPac sticks.
- Industrial manufacturing
${i18n.pdp.part-no}
420494
${i18n.pdp.idh-name}
LOCTITE® 175 Spray Series Hot Melt Applicator, Hot Melt system - 175 spray HT
System ${i18n.pdp.make-selection} Hot Melt system - 175 spray HT
- ${i18n.pdp.description}
- ${i18n.pdp.technical-specifications}
LOCTITE® 175-SPRAY and 175-SPRAY-HT are industrial grade, handheld, pneumatic hot melt applicators. The 175-SPRAY operating temperature is set at 180°C (356°F) and the 175-SPRAY-HT operating temperature is set at 195°C (383°F). By using the air adjustment control, the dispense pattern can be varied from a narrow to a wide spiral spray pattern. The dispense quantity and timing are manually controlled with the trigger mechanism. Pneumatically powered dispensing reduces operator fatigue. A standard wide spray nozzle and dispenser stand are included as part of the system. Included in the box: (1) 175-SPRAY or 175-SPRAY-HT applicator, (1) plastic stand (1) valve body air line adapter, (1) standard wide spray nozzle, (1) operating manual.
-
Adjustable flow control for tailoring the spray pattern
-
Innovative technology for small or large spray pattern
-
Automatic end-of-cycle purge to prevent nozzle clogging
-
Pneumatically powered actuation to reduce operator fatigue
-
High melt rate for maximum output
- ${i18n.pdp.product-category}
- Hot melt dispense systems
${i18n.pdp.technologies}
-
Specialties, equipment
- Air input pressure, Recommended:
- 5.0 psi - 100.0 psi
- Applications:
- Dispensing adhesives
- Dispense melt rate, Recommended:
- 8.0 lb./hr.
- Used to dispense, Recommended:
- Polyamides