Part no. (SKU/IDH):
408032
IDH Name:
LOCTITE PC 9465 10KG EN KIT
Protective coatings
Epoxy system for crusher wear metal backing: no more hazardous melting equipment
This 2-part epoxy system is designed for backing wear metal in gyratory and cone crushers.
Part no. (SKU/IDH):
408032
IDH Name:
LOCTITE PC 9465 10KG EN KIT
All marks used are trademarks and/or registered trademarks of Henkel and its affiliates in the US, Germany, and elsewhere.
-
{{#data}}
{{#distributor.isVisible}}
{{#distributor.isExpanded}}
- {{^distributor.unique}} {{/distributor.unique}} {{/distributor.isExpanded}} {{^distributor.isExpanded}} {{/distributor.isExpanded}} {{/distributor.isVisible}} {{/data}}
- Description
- Technical specification
LOCTITE® PC 9465 Nordbak® High Impact Backing Material is the original 100% solids epoxy system for backing wear metal in gyratory and cone crushers under typical dry service temperatures of -28°C to 104°C (-18°F to 219°F). The product needs no melting or special equipment, has high volumetric stability that eliminates formation of gaps between backing and liners or support structures, and contains elastomers for high impact and shock resistance. It is easy and safe to use.
-
Needs no special equipment
-
Highly resistant to shock and impact
-
Safe and easy to use
-
Room temperature cure
-
2-part: mixing required
- Product category:
- Protective coatings
Technologies:
-
Thermosets, 2K general epoxy
-
{{#data}}
{{#distributor.isVisible}}
{{#distributor.isExpanded}}
- {{^distributor.unique}} {{/distributor.unique}} {{/distributor.isExpanded}} {{^distributor.isExpanded}} {{/distributor.isExpanded}} {{/distributor.isVisible}} {{/data}}
