Part no. (SKU/IDH):
142146
IDH Name:
TEROSON® RB VII, Grey, 6 mm Roll
Flexible sealants
Multi-purpose, double-sided, synthetic rubber sealing cord
A multi-purpose and multi-substrate, double-sided, self-adhesive, permanently plastic-profiled, synthetic rubber sealing cord.
Part no. (SKU/IDH):
142146
IDH Name:
TEROSON® RB VII, Grey, 6 mm Roll
Color Please make your selection Grey
Size Please make your selection 6 mm
All marks used are trademarks and/or registered trademarks of Henkel and its affiliates in the US, Germany, and elsewhere.
-
{{#data}}
{{#distributor.isVisible}}
{{#distributor.isExpanded}}
- {{^distributor.unique}} {{/distributor.unique}} {{/distributor.isExpanded}} {{^distributor.isExpanded}} {{/distributor.isExpanded}} {{/distributor.isVisible}} {{/data}}
- Description
- Technical specification
TEROSON® RB VII is a black/white, double-sided, self-adhesive, permanently plastic-profiled, rubber-based sealing cord. It’s typically used in sheet manufacturing for sealing overlapping steel, steel sheets, aluminium, glass and plastic constructions, and in the automotive, railway carriage and caravan industries to seal metal, wood and plastic parts. It’s also suitable for spacing and protecting against corrosion between steel and non-ferrous metals. It also serves as a vibration damper. TEROSON RB VII is used as an inner sealant when sealing overlapping substrates, and the sealed parts need to be fixed mechanically, e.g. by clamps, screws, rivets or similar. It allows sealed joints to be re-opened for servicing, repair or recycling. Before application, surface pretreatment with TEROSON® VR 10 is recommended.
-
Allows dismantling of parts
-
Solvent-free
-
Offers good corrosion protection
-
Multi-purpose
-
Suitable as a spacer
- Product category:
- Flexible sealants
Technologies:
-
Rubber and plastisols, preformed parts
- Chemical basis / base:
- Butyl
- Colour:
- Black
How to use
TEROSON RB VII is used for sealing and as a spacer in the following areas: -in sheet manufacturing industry, e.g. sealing of overlapping steel, steel sheets, aluminum, glass and plastic constructions -as protection against contact corrosion between steel and nonferrous metals.
Unroll TEROSON RB VII and cut it to the desired length. Then apply the tape to the surface requiring sealing and press it on. Experience has shown that it is best not to remove the release paper or film when unrolling the tape, but only after it has been applied and pressed on.
-
{{#data}}
{{#distributor.isVisible}}
{{#distributor.isExpanded}}
- {{^distributor.unique}} {{/distributor.unique}} {{/distributor.isExpanded}} {{^distributor.isExpanded}} {{/distributor.isExpanded}} {{/distributor.isVisible}} {{/data}}
