Part no. (SKU/IDH):
233759
IDH Name:
LOCTITE® 410, 20 g Bottle
Instant adhesives
Toughened, high-viscosity adhesive
A 1-part, rubber-toughened, high-viscosity, black instant adhesive ideal for impact applications.
Part no. (SKU/IDH):
233759
IDH Name:
LOCTITE® 410, 20 g Bottle
All marks used are trademarks and/or registered trademarks of Henkel and its affiliates in the US, Germany, and elsewhere.
-
{{#data}}
{{#distributor.isVisible}}
{{#distributor.isExpanded}}
- {{^distributor.unique}} {{/distributor.unique}} {{/distributor.isExpanded}} {{^distributor.isExpanded}} {{/distributor.isExpanded}} {{/distributor.isVisible}} {{/data}}
- Description
- Technical specification
LOCTITE® 410 is a black, high-viscosity, rubber-toughened instant adhesive with a fixture time of 30–60 seconds. It has excellent peel-, impact- and shear strengths. It is suitable for use on metals, elastomers and plastics, especially where larger bond gaps are present.
-
Toughened, black
-
High viscosity
-
Excellent peel-, impact- and sheer strength
- Product category:
- Instant adhesives
Technologies:
-
Cyanoacrylate
- Colour:
- Black
- Fixture time:
- 30.0 sec. - 60.0 sec.
- Gap fill:
- 0.15 mm
FAQ
There are several methods to toughen CA adhesives, but the most popular ways are using rubber or anhydride toughening agents. The toughening agents are designed to absorb and distribute impact and stress applied to the adhesive bond line resulting in a tougher bond.
This is called blooming. This often occurs when there is an excessive amount of product being applied. To avoid blooming, use proper ventilation, less product, lower humidity, use a primer/accelerator, or a low bloom product.
Yes, CA’s should be stored in the refrigerator prior to opening, but DO NOT refrigerate them once they have already been opened. After opening, CA's should be used within 30 days for best performance.
This is a result of stress cracking. Uncured liquid CA remaining on some plastic substrate (such as polycarbonate, acrylic, and polysulfone) in a stressed condition may cause the formation of cracks in the plastic. Some remedies for avoiding/minimizing stress cracking are closing the bond joint quickly, use reinforced grades of plastic, anneal parts, or speed the cure of the CA with accelerator (or light for light curing CA products only).
All necessary H&S measures and PPE (personal protection equipment) requirements can be found on the product material safety data sheet, all of which are available via our website.
-
{{#data}}
{{#distributor.isVisible}}
{{#distributor.isExpanded}}
- {{^distributor.unique}} {{/distributor.unique}} {{/distributor.isExpanded}} {{^distributor.isExpanded}} {{/distributor.isExpanded}} {{/distributor.isVisible}} {{/data}}
Our experts are here to learn more about your needs.
Our support center and experts are ready to help you find solutions for your business needs.