Dispense systems
Precise dosing of instant adhesives with high repeatability
High precision, positive displacement, volumetric metering valves for dispensing cyanoacrylates (instant adhesive). For accurate, reliable, repeatable drop applications.
All marks used are trademarks and/or registered trademarks of Henkel and its affiliates in the US, Germany, and elsewhere.
- Description
- Technical specification
The LOCTITE® VA40 CA Volumetric Valve is designed to dispense drops of cyanoacrylate (1.5 to 6 microliters, at a maximum cycle rate of 120/minute). It includes a check valve design, which improves the speed and reliability of priming. And an innovative displacement rod and sealing system means you can rely on a long dispensing life before you need to think about rebuilding.
-
Designed for precision, volumetric drop dispensing of LOCTITE cyanoacrylate (CA) adhesives
-
Long life seal design (> 1 million cycles) minimizes maintenance requirements
-
Quick and reliable priming
-
Easily fed from a syringe or pressure reservoir
-
Included in the box: (1) VA40 CA Dispense Valve, (1) PTFE lined tubing, 6.4mm OD, 2 m long, (1) air line, 4mm OD, blue, 2 m, (1) air line, 4mm OD, yellow, 2 m, (1) needle sample kit, (1) operating manual
- Product category:
- High precision dispense valves
Technologies:
-
Specialties, equipment
- Air input pressure:
- 60.0 psi - 100.0 psi
- Applications:
- Dispensing adhesives
- Dispense patterns:
- Dots,Drops
- Fluid pressure, Recommended:
- 30.0 psi - 70.0 psi
- Key characteristics:
- Stroke adjustment
- Operating type:
- High precision,Positive displacement,Volumetric
- Used to dispense:
- Cyanoacrylates,Light cure acrylics
- Viscosity:
- 1.0 mPa·s - 10000.0 mPa·s