Part no. (SKU/IDH):
135479
IDH Name:
LOCTITE® 515, 50 ml Tube
Gasket sealants
Larger-gap-filling gasketing product for close-fitting rigid flanges
This anaerobic-curing flange sealant for rigid machined metal flanges fills gaps up to 0.25 mm (0.01") and typically exhibits a 30-minute fixture time.
Part no. (SKU/IDH):
135479
IDH Name:
LOCTITE® 515, 50 ml Tube
Size Please make your selection 50 ml
All marks used are trademarks and/or registered trademarks of Henkel and its affiliates in the US, Germany, and elsewhere.
-
{{#data}}
{{#distributor.isVisible}}
{{#distributor.isExpanded}}
-
{{^distributor.unique}}
{{/distributor.unique}}
{{#distributor.onShelf}} {{#distributor.withSpecialPrice}} {{distributor.prices.specialWithSymbol}}
{{distributor.prices.regularWithSymbol}}
{{#distributor.withoutSpecialPrice}} {{#distributor.prices.regularWithSymbol}} {{/distributor.withoutSpecialPrice}}{{/distributor.prices.regularWithSymbol}}{{distributor.prices.regularWithSymbol}}
{{#distributor.anyInStock}} {{/distributor.anyInStock}}In stock {{#distributor.notInStock}} {{/distributor.notInStock}}Out of stock {{#distributor.notOnShelf}} {{^distributor.notInStock}} {{#distributor.onShelf}} All available stock is already in cartYou have reached the maximum order quantity availableFor industrial use only. Not intended for consumer sale or use.
{{#distributor.notOnShelf}} {{/distributor.notInStock}}{{^distributor.notInStock}} {{#distributor.onShelf}} {{/distributor.notInStock}}{{#distributor.notInStock}} {{#distributor.onShelf}} {{#distributor.notInStock}} {{/distributor.onShelf}}There was a problem with your request. Please try again or contact us directly.
- Description
- Technical specification
LOCTITE® 515 is a form-in-place anaerobic-curing flange sealant that cures when confined in the absence of air between close fitting metal surfaces. It seals close-fitting joints between rigid metal faces and flanges and will flex with minor flange movements. It provides resistance to low pressures immediately after assembly of flanges, and is typically used as a form-in-place gasket for pumps, thermostats, compressors, transmission housings, and axle covers. The product is fluorescent under UV light, allowing visual inspection of the bead.
-
For machined metal components
-
Forms a perfect seal
-
Gap fill up to 0.25 mm (0.01")
-
Form-in-place sealant
-
Fluorescent under UV for quality control
-
- Product category:
- Gasket sealants
Technologies:
-
Acrylates, anaerobic cure
- Application method:
- Dispense system; Manual
- Applications:
- Rigid assembly gasketing; Sealing
- Chemical basis / base:
- Methacrylate
- Colour:
- Purple
- Cure type:
- Anaerobic cure
- Fixture time:
- 30.0 min.
- Gap fill:
- 0.25 mm
- Key characteristics:
- Fluorescent; For machined, rigid flanges; Strength: medium strength; Thixotropic
- Lab shear strength:
- 6.0 N/mm²
- Number of components:
- 1 part
- Physical form:
- Gel
- Recommended for use with:
- Metal: aluminium; Metal: steel
- Storage temperature:
- 8.0 °C - 21.0 °C
- Viscosity, Brookfield - HBT, @ 25.0 °C:
- 700000.0 mPa·s (cP) - 1700000.0 mPa·s (cP)
- Viscosity, Brookfield - HBT, @ 25.0 °C:
- 150000.0 mPa·s (cP) - 375000.0 mPa·s (cP)
-
{{#data}}
{{#distributor.isVisible}}
{{#distributor.isExpanded}}
- {{^distributor.unique}} {{/distributor.unique}} {{/distributor.isExpanded}} {{^distributor.isExpanded}} {{/distributor.isExpanded}} {{/distributor.isVisible}} {{/data}}
