Part no. (SKU/IDH):
234238
IDH Name:
LOCTITE® 510, 250 ml Tottle
Gasket sealants
High-temperature, chemically resistant sealant for close-fitting rigid flanges
This form-in-place anaerobic-curing gasketing sealant provides high temperature and chemical resistance on close-fitting, rigid, machined metal flanges.
Part no. (SKU/IDH):
234238
IDH Name:
LOCTITE® 510, 250 ml Tottle
Packaging type Please make your selection Tottle
All marks used are trademarks and/or registered trademarks of Henkel and its affiliates in the US, Germany, and elsewhere.
-
{{#data}}
{{#distributor.isVisible}}
{{#distributor.isExpanded}}
- {{^distributor.unique}} {{/distributor.unique}} {{/distributor.isExpanded}} {{^distributor.isExpanded}} {{/distributor.isExpanded}} {{/distributor.isVisible}} {{/data}}
- Description
- Technical specification
LOCTITE® 510 is a highly temperature-resistant, form-in-place, anaerobic-curing sealant which forms an instant, low-pressure seal when confined in the absence of air between close-fitting metal surfaces. Ideal for rigid flanges, especially in transmissions and motor casings. Unprimed gap-fill is 0.25 mm (0.01"). Recommended for use with aluminium and steel substrates.
-
For close-fitting, rigid metal flanges
-
Temperature-resistant up to 204°C (400°F)
-
Adapts to surface irregularities and scratches up to 0.25mm (0.01") deep
-
Increases torque capacity of assembled flanges
-
Registered to NSF Category P1
-
- Product category:
- Gasket sealants
Technologies:
-
Acrylates, anaerobic cure
- Application method:
- Dispense system; Manual; Screen printing
- Applications:
- For close fitting parts; For high temperature applications; Rigid assembly gasketing; Sealing
- Chemical basis / base:
- Dimethacrylate ester
- Colour:
- Pink
- Cure type:
- Anaerobic cure
- Fixture time, Steel:
- 25.0 min.
- Gap fill, Unprimed:
- 0.25 mm
- Key characteristics:
- Chemical resistant; For machined, rigid flanges; Strength: medium strength; Thixotropic
- Number of components:
- 1 part
- Operating temperature:
- -65.0 °F - 400.0 °F (-55.0 °C - 200.0 °C)
- Physical form:
- Gel
- Recommended for use with:
- Metal: aluminium; Metal: steel
- Storage temperature:
- 8.0 °C - 21.0 °C
- Viscosity, 20 RPM:
- 90000.0 mPa·s (cP)
-
{{#data}}
{{#distributor.isVisible}}
{{#distributor.isExpanded}}
- {{^distributor.unique}} {{/distributor.unique}} {{/distributor.isExpanded}} {{^distributor.isExpanded}} {{/distributor.isExpanded}} {{/distributor.isVisible}} {{/data}}
