Conversion coatings
Chromate-free conversion coating for aluminum
A non-hexavalent chromium, dry-in-place metal pre-treatment chemical for conversion coating of aluminum and its alloys.
All marks used are trademarks and/or registered trademarks of Henkel and its affiliates in the US, Germany, and elsewhere.
- Description
- Technical specification
If you're looking for an easy and safe repair for bare areas of aluminum surfaces, consider BONDERITE® M-CR 871 AERO. This non-hexavalent chromium, dry-in-place coating pen is easy to use, requires no rinsing, and is specifically designed to save labor, material, and time. It requires no rinsing with water and provides excellent paint adhesion and corrosion resistance. The applicator itself ensures easy and safe operation. It contains enough solution to treat up to 4.6 sq. m (50 sq. ft.), and is approved for use on parts that must meet MIL-DTL81706B Class 1A and 3 standards.
-
Based on non-rinsing, dry-in-place technology
-
Easy to use
-
Provides excellent paint adhesion
-
Provides corrosion resistance
-
Meets the requirements of MIL-DTL81706B Class 1A and 3
- Product category:
- Conversion coatings
Technologies:
-
Surface treatments and cleaners, liquid
How to use
Remove the cap
Remove the existing tip
Insert replacement tip
Holding the Touch-N-Prep® pen upright, press and hold the pen tip down on the surface.
Apply BONDERITE® pen solution to the aluminum surface.
Discard the replacement tip after use and cap the Touch-N-Prep®.
FAQ
Each pen contains 35mL of solution
Each pen has enough solution to treat approximately 50 ft², based on the performance requirements such as corrosion or electrical resistance
MIL-DTL-5541 is the process specification for chemical conversion coatings on aluminum and aluminum alloys. This specification references the qualified products list (QPL) on MIL-DTL-81706, which lists both BONDERITE M-CR 1132 AERO and BONDERITE M-CR 871 AERO. Henkel certifies both products to MIL-DTL-81706B.
BONDERITE M-CR 1132 AERO is a hexavalent chrome chemical conversion coating and BONDERITE M-CR 871 AERO is a trivalent chrome chemical conversion coating. BONDERITE M-CR 1132 AERO leaves an apparent yellow gold coating after application and BONDERITE M-CR 871 AERO leaves a clear iridescent coating after application. Performance of both coatings meets the same corrosion protection and paint adhesion requirements per MIL-DTL-81706B.
