Structural adhesives
Automotive grade, fast plastic repair adhesive
This 2-part polyurethane adhesive is your allrounder for repairing vehicle body parts made of plastic. Open time of 10 minutes.
All marks used are trademarks and/or registered trademarks of Henkel and its affiliates in the US, Germany, and elsewhere.
- Description
- Technical specification
TEROSON® PU 9225 is a 2-part polyurethane repair adhesive. It is typically used for repair tasks on paintable interior and exterior plastic parts, in particular for damages such as scratches or holes in bumpers, spoilers, aprons, etc. The product can be cured with infrared light at 60°C (140°F) or Flexitherm heating pads. Easy application with the TEROMIX® HAND GUN (50 ml cartridges) or TEROSON® ET STAKU HAND GUN (250 ml cartridges) and appropriate static mixer. Before application, surface cleaning with TEROSON® VR 10 and priming with TEROSON® VR 155 are recommended. TEROSON PU 9225 cures at room temperature, with accelerated cure possible using infrared heat at 60°C (140°F).
-
Recommended for repair areas more than 7 cm (2,76")
-
Pot-life: 10 minutes
-
Sandable after 20 minutes(23°C/73,4°F, 50% rh)
-
Overpaintable with all car paint systems (use adhesion promoter TEROSON VR 155)
-
OEM approved
- Product category:
- Structural adhesives
Technologies:
-
2K liquid
-
Polyurethanes, specialties
- Color:
- Dark gray
